Specifications

SW
NO.
Data
NO.
Item Switch selection and contents of functions Initial value
User
program
No.
Remark
SW15 1 Lower limit of
busy tone
detection time
Used to set the lower limit of busy tone detection time
(ON time).
250 ms 0
2 Upper limit of
busy tone
detection time
Used to set the upper limit of busy tone detection time
(ON time).
750 ms 0
3 Reserved 0
4 Reserved 0
5 Modem speed
(other than
V.33 mode)
Used to set the communication start speed other in a
mode other than V.34 mode. In areas of poor
communication conditions, this setup is used to reduce
the communication speed in advance.
V.17
14.4 kbps
1 For the bits
marked with ∗,
set to V.17
14.4 kbps.
6 0
7 0
8 0
SW16 1 Reserved 0
2 External
telephone
connection
Used to set whether an external telephone is connected
or not.
YES 1 106
3 Reserved 0
4 Reserved 0
5 Reserved 0
6 Rotation
transmission
select (8.5″ ×
11″ → 8.5″ ×
11″R)
Used to set whether 8.5″ × 11″ document is sent as 11″
× 17″ width (8.5″ × 11″) or it is sent as 8.5″ × 11″R by
rotating read images.
YES 1 125
7 Reserved 0
8 Reserved 0
SW17 1 Reserved 0
2 Output
conditions setup
Used to set the size of paper to output when a
document is received.
A: Optimum size output (Received size)
B: Larger than the optimum
C: Divided output
D: Reduced output
ABD 0 133 When set to
“11” or “01”,
set to “00”
(ABD).
3 0
4 Reserved 0
SW17 5 Reserved 0
6 Reserved 0
7 Reserved 0
8 Reserved 0
1: 350 ms 0: 250 ms
1: 650 ms 0: 750 ms
SW15 Bit No. 5 6 7 8 SW15 Bit No. 5 6 7 8
V.27 2400 bps 0 0 0 0 V.17 14.4 kbps 1 0 0 0
V.29 9600 bps 0 0 0 1 V.17 9600 bps 1 0 0 1
V.27 4800 bps 0 0 1 0 V.17 12.0 kbps 1 0 1 0
V.29 7200 bps 0 0 1 1 V.17 7200 bps 1 0 1 1
V.33 14.4 kbps 0 1 0 0 ★ 1 1 0 0
★ 0 1 0 1 ★ 1 1 0 1
V.33 12.0 kbps 0 1 1 0 ★ 1 1 1 0
★ 0 1 1 1 ★ 1 1 1 1
1: YES 0: NO
1: YES 0: NO
SW17 Bit No. 2 3
ABD 0 0
ABC 1 0
AR-FX2
6 – 7