Specifications

SW
NO.
Data
NO.
Item Switch selection and contents of functions Initial value
User
program
No.
Remark
SW25 1 Auto reduction
ratio setup
Used to set the auto reduction ratio when “Auto
reduction print” is set to Enable. The set value is the
min. reduction ratio.
10% 1
2 0
3 1
4 0
5 Reserved 0
6 Reserved 0
7 Reserved 0
8 Reserved 0
SW26 1 Read end
sound
Used to set whether read end sound is made or not
when read is completed. For manual transmission and
direct transmission, no sound is made.
1 sec 0
2 Reserved 0
3 Speaker sound
volume setup
Used to set speaker sound volume. The following items
of sound volume setup are the same as this setup: Line
monitor sound volume, operation panel sound volume,
send end sound volume, receive end sound volume,
read end sound volume.
Small 0 104
4 1
5 Reserved 0
6 Reserved 0
7 Reserved 0
8 Reserved 0
SW27 1 Reserved 0
2 Recording
paper tray
select
Used to select the tray for output of the received
documents. Tray 1 – Tray 4 can be set to ON/OFF
individually. When set to OFF, the tray does not output
received documents.
ON 1 134 When set to
“0000”, set to
“1111” (All ON).
3 ON 1
4 ON 1
5 ON 1
6 Reserved 0
7 Reserved 0
8 Reserved 0
SW25 Bit No. 1 2 3 4
Set range 0 – 15% (Binary input)
1: Silent 0: 1 sec
SW26 Bit No. 3 4
(Each sound volume can be
turned OFF individually. When
this is set to OFF, all the
items on the left are turned
OFF.)
Silent (OFF) 0 0
Small 0 1
Medium 1 0
Large 1 1
SW27 Bit No. 2 Tray 1 1: ON 0: OFF
SW27 Bit No. 3 Tray 2 1: ON 0: OFF
SW27 Bit No. 4 Tray 3 1: ON 0: OFF
SW27 Bit No. 5 Tray 4 1: ON 0: OFF
AR-FX2
6 – 11