Specifications

SW
NO.
Data
NO.
Item Switch selection and contents of functions Initial value
User
program
No.
Remark
SW31 1 Report output
(Transmission)
Used to set whether the communication report is
outputted or not after completion of transmission
(excluding sequential broadcasting, sequential send
request, and interface broadcasting).
Only
when
transmis-
sion is
cancelled
1 137 When set to
“11”, set to “10”
(Only when
transmission
cannot be
made)
2 0
3 Report output
(Sequential
broadcasting,
sequential
send request,
interface
broadcasting)
Used to set whether the communication report table is
outputted or not after completion of transmission
(sequential broadcasting, sequential send request, and
interface broadcasting).
All print 0 137 When set to
“11”, set to “01”
(All print).
4 1
5 Report output
(Reception)
Used to set whether the communication report table is
outputted or not when a reception (excluding confidential
reception) is made.
Print
inhibited
0 137 When set to
“11”, set to “00”
(Print inhibited).
6 0
7 Reserved 0
8 Reserved 0
SW32 1 Distinctive ring Used to set the ring pattern of FAX reception. 0 110 When a bit
other than the
specified on
the left is set,
the initial value
“0000(OFF)” is
set.
2 0
3 0
4 0
5 Reserved 0
6 Index print
setup
Used to set whether the index is printed or not when
outputting received documents.
Not print 0 142
7 Reserved 0
8 Reserved 0
SW31 Bit No. 1 2
Print inhibited 0 0
All print 0 1
Only when transmission is cancelled 1 0
SW31 Bit No. 3 4
Print inhibited 0 0
All print 0 1
Only the addressee to which a transmission
is canceled
1 0
SW31 Bit No. 5 6
Print inhibited 0 0
All print 0 1
Only in case of an error 1 0
SW32 BitNo. 1 2 3 4
OFF 0 0 0 0
Standard Ring 0 0 0 1
Pattern 1 1 0 0 0
Pattern 2 0 1 0 0
Pattern 3 1 1 0 0
Pattern 4 0 0 1 0
Pattern 5 1 0 1 0
1: Print 0: Not print
AR-FX2
6 – 13