Specifications

[7] USER PROGRAMS
1. List
Number Program Name
Soft SW
setup
Function Note
101
DEPARTMENT CODE
SETTING
SW30-4 Set to restrict the use of the fax function to certain departments.
102 DIAL MODE SETTING SW44-1 ∼ 2 Set to select the type of phone line used for connection.
103 PAUSE TIME SETTING SW38-1 ∼ 4 Use to change the duration of pauses inserted in a recipient’s fax number.
104
SPEAKER VOLUME
SETTING
SW13-3 ∼
4, SW26-3
∼ 4
Set to increase or decrease the speaker volume.
106
EXTENSION TEL.
SETTING
SW16-2 Set to connect an extension telephone.
108
REMOTE RECEPTION #
SETTING
SW2-1 ∼ 8
Set to enter a 2-digit number for the remote reception of faxes on an
extension telephone.
109
FW. RX DATA SETTING
FOR FAX DATA
TRANSFER
SW38-7
Set to enter a phone number for the transferring of faxes that the fax
machine cannot output.
110
DISTINCTIVE RINGING
PATTERN
SW32-1 ∼ 4 Set the distinctive ringing pattern for your fax machine.
111
RECALL INTERVAL
(BUSY) SETING
SW4-5 ∼ 8
Set to change the time interval for dial retries when the recipient’s line is
busy.
112
RECALL TIMES (BUSY)
SETTING
SW41-1 ∼ 8 Set to change the number of retries when the recipient’s line is busy.
113
RECALL INTERVAL (LINE
ERROR) SETTING
SW4-1 ∼ 4
Set to change the time interval for dial retries when there is a transmission
error.
114
RECALL TIMES (LINE
ERROR) SETTING
SW40-1 ∼ 8 Set to change the number of retries when there is a transmission error.
115
INTERRUPT TX AT
RECALL MODE SETTING
SW19-2
Set to control whether faxes waiting in memory will be sent when the
current job cannot be sent (for example, because of a busy signal).
116
# OF RINGS AUTO TX
SETTING
SW39-1 ∼ 3
Set to change the time that elapses before an automatic transmission stops
when there is no answer from the recipient’s fax.
117
# OF RINGS AUTO RX
SETTING
SW29-5 ∼ 8 Set to change the number of rings for automatic reception.
118
POLLING SECURITY
SETTING
SW1-5
Sets polling security so that only designated people can poll your fax
machine.
119 PASSCODE # SETTING No soft SW
Use to create passcodes that contain the numbers of the fax machines you
want to allow to poll your fax machine.
120 ID # SETTING No soft SW
Use to enter the ID number of fax machines you want to allow to poll your
fax machine.
121 SYSTEM NO. SETTING No soft SW Use to enter the system number of your fax machine.
122 CONF. BOX # SETTING No soft SW
Use to enter the mailbox number and passcode for confidential fax
reception.
123
RELAY PASSCODE
SETTING
No soft SW
Use to create a relay passcode list of fax machines that you want to allow
to make relay requests to your fax machine.
124
AUTO REDUCE TX
SETTING
SW1-4 Set to control the automatic reduction of faxes before transmission.
125 ROTATE TX SETTING SW16-6 ∼ 8
Set to control whether the image of the original is rotated before
transmission.
126 A3 RX REDUCE SETTING Set to control whether A3 size originals that are received are reduced.
131 OWN PASSCODE SET No soft SW Use to enter your own name and telephone number.
132 RX REDUCE SET SW24-8
Set to automatically reduce the size of received faxes to fit the available
paper size.
133 PRINT COND. SETTING SW17-2 ∼ 3
Set to control whether a received fax that is bigger than the available paper
is printed on several pages or automatically reduced.
134
TRAY SELECT IN RCV.
PRINT SETTING
SW27-2 ∼ 5
Set to specify automatic paper selection or a specific tray that holds the
paper for printing received faxes.
137
TRANSACTION REPORT
PRINT SELECT SETTING
SW31-1 ∼ 6 Set to control when to print a transaction report.
AR-FX2
7 – 1