Specifications

Number Program Name
Soft SW
setup
Function Note
138
IMAGE MEM. PRINT
(LINE ERROR) SETTING
SW1-7
Set to control whether to print the first part of the original on the
transaction report when there is an error.
139 AUTO LISTING SETTING
SW19-7 ∼ 8,
SW47-1 ∼ 5,
SW48-1 ∼ 6,
SW49-1 ∼ 5,
SW50-1 ∼ 6
Set to have a listing of fax activity automatically printed at a certain time.
140
PRINT STATION # IN
RCVD DATA SETTING
SW30-7
Set to choose where to print the date, your name, and your fax number on
faxes you send.
141
PAGE COUNTER PRINT
SETTING
SW33-1 Set to print page numbers on faxes you send.
142 INDEX PRINT SW32-6 Set to print an index mark on the top of received faxes.
143 DATE AND TIME SETTING No soft SW Use to set the date and time of the internal clock.
144
DAYLIGHT SAVING TIME
SETTING
SW46-5 Set the fax machine to automatically make time changes during the year.
151 RES. PRIORITY SETTING SW1-1 ∼ 2
Set to select the resolution of transmitted faxes (for example, STANDARD,
FINE, SUPER FINE, ULTRA FINE).
152 SEND MODE SW8-1
Set to choose whether direct mode or memory sending mode is the default
in the initial state.
153 EXPOSURE SETTING SW3-1 ∼ 5
Set to select the exposure of transmitted faxes (for example, LIGHT,
MEDIUM, DARK).
161
OPTIONAL SETTING LIST
PRINT
No soft SW Set to choose whether to print a list of settings made in user programs.
2. How to use user programs
You cannot change user programs during a fax transmission or recep-
tion.
1) Select fax mode.
If the copier mode indicator is lit, press the COPY/FAX key.
2) Press and hold the light ( ) key for more than 5 seconds.
The following message is displayed.
3) Enter the desired user program number (3-digit) using the numeric
keys, then press the START key.
The user program number and name are displayed.
Instead of entering the user program number, you can also press
the left arrow key ( ) or right arrow key ( ) to select the user
program.
Canceling: If you make a mistake entering the user program num-
ber, press the CLEAR key and enter the number again.
4) Follow the instructions that start on the next page for specific infor-
mation about setting user programs.
Canceling: When setting using programs, if you make a mistake
entering a number or time using the numeric keys, open
the rapid key overlay, press the CLEAR key, and enter
the numbers again.
When setting user programs, the current settings and
options are shown on the display panel.
When you want to exit from the middle of a user program, press the
light ( ) key.
When changing between screens, use the arrow keys as follows.
5) When you are finished setting user programs, press the light ( )
key.
USER PROGRAM
ENTER PRG. #=
DIAL MODE
2:PULSE
DIAL MODE
1:TONE
Example: P102 DIAL MODE SETTING
Press the left
arrow key
( )
Press the right
arrow key
( )
Example: P102 DIAL MODE SETTING
Press the left
arrow key
( )
Press the right
arrow key
( )
AR-FX2
7 – 2