Specifications

<Communication result codes>
Error
code
Final reception signal
(Transmitting side)
Final reception signal
(Receiving side)
0 Abnormal signal Abnormal signal
1 NSF, DIS NSS, DCS
2 CFR NSC, DTC
3 FTT EOP
4 MCF EOM
5 PIP, PIN MPS
6 RTN, RTP PRI-Q
7 No signal DCN
8 PPR PPS-EOP
9 PPS-EOM
10 PPS-MPS, PPS-NULL
11 RNR RR
12 CTR CTC
13 ERR EOR-Q
14 PPS-PRI-Q
15
16 Abnormal signal Abnormal signal
17 NSF, DIS NSS, DCS
18 CFR NSC, DTC
19 FTT PPS-EOP
20 MCF PPS-EOM
21 PIP, PIN PPS-MPS, PPS-NULL
22 RTN, RTP PRI-Q
23 No signal DCN
24 PPR
25 RNR RR
26 CTR CTC
27 ERR EOR-Q
28 PPS-PRI-Q
29 V.8 Phase-1 V.8 Phase-1
30 V.8 Phase-2 V.8 Phase-2
31 V.8 Phase-3 V.8 Phase-3
(Note) For error codes 16 – 31, V.34 mode communication.
<Error codes 1>
21 Timeout standby for INFO0
22 Check sum error in INFO0
23 Timeout standby for tone A or B
24 Timeout standby for the first phase reversion
25 Timeout standby for cut off tone probing
26 Timeout standby for the second phase reversion
27 Timeout standby for probing end
28 Timeout standby for the third phase reversion
29 Timeout standby for INFO1
2A Check sum error in INFO1
2B Tone found before INFO1
2C Unexpected INFO0 found
31 Timeout standby for turning off the reception control
channel
91 Error in the first CC train
92 Timeout standby for PPh
93 Tone A/B detected in CC retrain
94 Timeout standby for ALT
95 Ach found
96 FED OFF with CC data
97 Timeout standby for turning off CC
A1 A trouble which cannot be solved in phase 2. Retrain is
forcibly made.
B1 Trouble in S sequence of HDX-resync
B1 FED OFF in S sequence of HDX-resync
B2 Unexpected completion of S sequence in HDX-resync
B3 Timeout standby for S-Sbar in HDX-resync
B4 Timeout standby for S-Sbar in HDX-resync
B5 Timeout standby for S in HDX-resync
B6 Timeout for sync with PP
C0 Trouble in S sequence of phase 3
C1 FED OFF in S sequence of phase 3
C2 Unexpected completion of S sequence
C3 Timeout standby for S-Sbar of phase 3
C4 Timeout standby for S-Sbar of phase 3
C5 Timeout standby for S of phase 3
C7 Training due to TRN failure
D0 Trouble in S sequence of phase 4
D1 FED OFF in S sequence of phase 4
D2 Unexpected completion of S sequence
D3 Timeout standby for S-Sbar of phase 4
D4 Timeout standby for S-Sbar of phase 4
D5 Timeout standby for S of phase 4
D6 Timeout standby for MP
D8 Timeout standby for E
DA Timeout at renegotiation of the transmitter rate
DB Timeout at MPh of the transmitter
E2 Retrain detected in phase 2
E3 Retrain detected in phase 3
E4 Retrain detected in phase 4
FE DTR OFF in retrain
FF Tx setup port flag
71 Writing is not made to the first mapping frame.
AR-FX2
10 – 3