Owner's Manual

KEY OPERATOR PROGRAMS
18
Reset Account
This program is used to reset all audit accounts or to selectively reset individual accounts.
When "RESET ACCOUNT" is selected and the OK key is pressed, the following display will appear.
To reset all accounts
1. Use the and keys to select "RESET ALL ACC." and press the OK
key.
2. Use the and keys to select "YES" and press the OK key.
To reset a single account
1. Use the and keys to select "RESET 1 ACC." and press the OK key.
2. Use the and keys to select an account to be reset and press the OK
key.
●
If "000,000" is displayed for COPY LIMIT, no account limit has been set for the account.
3. Use the and keys to select "YES" and press the OK key.
4. Continue with steps 2 and 3 for other account numbers. Press the
BACK key repeatedly to exit the program.
Account Number Control
This program is used to register accounts, delete accounts or change an account number.
When "ACC. # CONTROL" is selected and the OK key is pressed, the following display will appear.
To register accounts
1. Use the and keys to select "ENTER" and press the OK key.
●
If 50 accounts have already been registered, the message "The account register is full.
50 is maximum." will appear.
2. Enter a 5-digit account number (00000 to 99999) using the numeric
keys.
●
Select a number different from the key operator code number.
3. Press the OK key.
●
If a number that is already registered is entered, the message "This number is already
used. Enter another number." will appear.
4. To enter other account numbers, repeat steps 2 and 3. Press the
BACK key repeatedly to exit the program.
RESET ACCOUNT
-----
RESET 1 ACC.
RESET ALL ACC.
ACC. # CONTROL
-----
ENTER
DELETE
CHANGE
Ar-M208_keyope_sec.book 18 ページ ２００２年６月１２日 水曜日 午後３時４１分