ページ 年 月 日 木曜日 午後 時 分 MODEL AR-M208 DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUAL Page • GETTING STARTED • MAKING COPIES 5 23 • SPECIAL FUNCTIONS • COPIER TROUBLE? 47 71 • GENERAL INFORMATION 85 • OPTIONAL EQUIPMENT 99
ページ 年 月 日 木曜日 午後 時 分 ➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣ FOR YOUR RECORDS ... To protect against loss or theft, record and retain for reference the copier’s serial number located on the back of the unit.
ページ 年 月 日 木曜日 午後 時 分 2 OUTLINE OF THIS MANUAL 1. GETTING STARTED This chapter describes the basic information on the use of this copier. 2. MAKING COPIES This chapter describes the basic copying functions such as normal copying, reduction or enlargement, and exposure adjustments. 3. 4 GENERAL INFORMATION This chapter describes general information about the use of the copier and the loading of paper and toner. 6.
ページ 年 月 日 木曜日 午後 時 分 CONTENTS Page CHAPTER 1 GETTING STARTED INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 COPIER INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 MAIN FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PART NAMES AND FUNCTIONS . . . . . . . . .
ページ 年 月 日 木曜日 午後 時 分 CONTENTS Page CHAPTER 4 COPIER TROUBLE? STATUS MESSAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MISFEED REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ● Misfeed in the RSPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ● Misfeed in the bypass tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ● Misfeed in the copier . . . . . . . . . . . . . . . . . . . . .
ページ CONTENTS 4 年 月 日 木曜日 午後 時 分
ページ 年 月 日 木曜日 午後 時 分 1 CHAPTER 1 GETTING STARTED This chapter describes the basic information on the use of this copier. Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 ● CAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ● COPIER INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ● MAIN FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ 年 月 日 木曜日 午後 時 分 INTRODUCTION This copier has been designed to provide convenient copying features in a minimum amount of office space and with maximum operational ease. To get full use of all copier features, be sure to familiarize yourself with this manual and the copier. For quick reference during copier use, keep this manual in a handy location.
ページ 年 月 日 木曜日 午後 時 分 CAUTIONS Follow the cautions below when using this copier. WARNING: 1 ● The ● Do fusing area is hot. Exercise care in this area when removing misfed paper. not look directly at the light source. Doing so may damage your eyes. CAUTION: ● The SAFETY PRECAUTIONS ● This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This means that the copier does not produce hazardous laser radiation.
ページ 年 月 日 木曜日 午後 時 分 COPIER INSTALLATION Improper installation may damage the copier. Please note the following during initial installation and whenever the copier is moved. CAUTION: If the copier is moved from a cool place to a warm place, condensation may form inside the copier. Operation in this condition will cause poor copy quality and malfunctions. Leave the copier at room temperature for at least 2 hours before use.
ページ 年 月 日 木曜日 午後 時 分 COPIER INSTALLATION Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements (See page 97.). Also make certain the outlet is properly grounded. NOTE: Connect the copier to a power outlet which is not used for other electric appliances. If a lighting fixture is connected to the same outlet, the light may flicker. 12" (30 cm) A small amount of ozone is produced within the copier during operation.
ページ 年 月 日 木曜日 午後 時 分 MAIN FEATURES 1 High-speed laser copying ● ● GETTING STARTED 2 High-quality digital image ● ● ● 3 First-copy time at 600 dpi is only 4.8 seconds (except when recovering from a power save mode or immediately after power on). Copying speed is 20 copies/min. at 600 dpi, which lends itself for business use, providing improvement in working efficiency. High-quality copying at 600 dpi is performed.
ページ 年 月 日 木曜日 午後 時 分 MAIN FEATURES 4 Scan once/ Print many ● 5 ● ● ● A reversing single pass feeder (RSPF) allows automatic document feeding of up to 40 two-sided originals. An optional finisher allows automatic stapling of up to 30 sheets. This copier can be used as a facsimile machine if an optional facsimile expansion kit is installed. This copier can be used as a network scanner if an optional network scanner expansion kit is installed.
ページ 年 月 日 木曜日 午後 時 分 PART NAMES AND FUNCTIONS Exterior GETTING STARTED Document feeder tray (p. 26) Hold up to 40 originals. Original guides Ajust to the size of the originals. Right side cover (p. 74) Open to remove misfed originals. Feeding roller cover (p. 73) Open to remove misfed originals. Exit area Finished originals are output here. Platen glass (p. 24) Place an original to be copied here. USB interface connector Plug a USB interface cable into this connnector.
ページ 年 月 日 木曜日 午後 時 分 PART NAMES AND FUNCTIONS Interior 1 GETTING STARTED Bypass tray paper guides (p. 42) Adjust to the width of the copy paper. Bypass tray (p. 41) Paper including special paper (such as transparency film) can be fed from the bypass tray. Bypass tray extension (p. 41) Pull out when feeding large paper such as 8-1/2" x 11"R, 8-1/2" x 14" and 11" x 17". Fusing unit release levers (p. 78) Lower to remove misfed paper. WARNING: The fusing unit is hot. Take care in removing paper.
ページ 年 月 日 木曜日 午後 時 分 PART NAMES AND FUNCTIONS Operation panel GETTING STARTED COPY key and indicator (p. 84, 92) Press to select the COPY mode. Press and hold during standby or during warmup to display the total output count and the quantity of toner remaining. Mode keys and indicators Use these keys when relevant components are installed. Copy quantity display Displays the specified copy quantity during standby and displays the copy countdown as copies are made.
ページ 年 月 日 木曜日 午後 時 分 PART NAMES AND FUNCTIONS 1 Ready to copy. 81/2 11 100% 81/2 11 AUTO IMAGE key (p. 37) Press for automatic copy ratio selection. 2-SIDED COPY key (p. 28) Press to select the 1-sided to 1-sided, 1-sided to 2-sided, 2-sided to 2-sided or 2-sided to 1-sided copy mode. OUTPUT key (p. 49) Press to select the sort, group or staple sort* mode. * To select the staple sort mode, an optional finisher must be installed. SPECIAL FUNCTION key Press to select special functions.
ページ 年 月 日 木曜日 午後 時 分 POWER ON AND OFF The power switch is located on the left side of the copier. Power on Turn the power switch to the "ON" position. Power on GETTING STARTED Power off ● When the power switch is turned to the "ON" position, the message "System check." will appear in the message display and warm-up will start. During warm-up, you can select your desired job settings and then by pressing the START ( ) key, your job will commence when the copier comes to "Ready to copy.".
ページ 年 月 日 木曜日 午後 時 分 POWER ON AND OFF Initial settings The copier assumes the initial settings when it is first turned on, when the CLEAR ALL (CA) key is pressed, or a preset time (auto clear time) after the last copy is made in any mode. The initial settings that appear in the display are shown below. Ready to copy.
ページ 年 月 日 木曜日 午後 時 分 FUNCTION ICONS The following function icons will be indicated on the setting screen of each copier function.
ページ 年 月 日 木曜日 午後 時 分 FUNCTION REVIEW The current settings of copier functions that have been selected can be viewed in the display. ● The XY ZOOM and TRANSPARENCY functions cannot be viewed on the function review screen. 1 Press the JOB STATUS key. 2 Use the ● The 1 review screen will appear. GETTING STARTED and keys to select a function. FUNCTION REVIEW DUAL PAGE COPY ● The setting for the selected function will appear in the display.
ページ 年 月 日 木曜日 午後 時 分 AUDITING ACCOUNTS If this copier has been programmed in the auditing mode, it will not perform copier functions until an assigned 5-digit account number has been entered. ★ KEY OPERATOR See page 17 of the KEY OPERATOR'S GUIDE for setting the auditing mode. How to copy in the auditing mode GETTING STARTED If the copier has been programmed in the auditing mode, the following message will appear in the display in place of the normal initial conditions display.
ページ 年 月 日 木曜日 午後 時 分 AUDITING ACCOUNTS 2 When copying is completed, press the AUDIT CLEAR key. 1 Please see your key operator for assistance. ★KEY OPERATOR security. See page 19 of the KEY OPERATOR'S GUIDE for account number 21 GETTING STARTED NOTE: If an unassigned number is entered, "Enter your account number." will appear again in the display, indicating that the number was not accepted.
ページ GETTING STARTED 22 年 月 日 木曜日 午後 時 分
ページ 年 月 日 木曜日 午後 時 分 CHAPTER 2 2 MAKING COPIES This chapter describes the basic copying functions such as normal copying, reduction or enlargement, and exposure adjustments. Page FROM THE PLATEN GLASS. . . . . . . . . . . . . . . . . . . . 24 ● COPYING FROM THE RSPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 About reversing single pass feeder (RSPF). . . . . . . . . . . . . . . . . . 26 Using the RSPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ 年 月 日 木曜日 午後 時 分 COPYING FROM THE PLATEN GLASS The basic copying procedure is described below. ● Image loss (max. 5/32" (4 mm)) can occur at the leading and trailing edges of the copies. Also image loss (max. 1/8" (3 mm)) can occur along the other edges of the copies. NOTE: If the copier has been programmed in the auditing mode, enter a 5-digit account number. See page 20. 1 Place an original face down on the platen glass and align it with the original size scale.
ページ 年 月 日 木曜日 午後 時 分 COPYING FROM THE PLATEN GLASS 3 Ensure that the desired paper tray is selected. Ready to copy. 81/2 11 AUTO 100% 81/2 11 4 AUTO Set the number of copies using the numeric keys. MAKING COPIES ●A 2 single copy can be made even when "0" is displayed. the CLEAR (C) key to clear an entry if a mistake is made. ● Press 5 Press the START ( ) key. ● The number in the copy quantity display will decrease by 1 each time a copy is made.
ページ 年 月 日 木曜日 午後 時 分 COPYING FROM THE RSPF About reversing single pass feeder (RSPF) The reversing single pass feeder (RSPF) hold up to 40 originals each for automatic document feeding. If the RSPF is being used, two-sided originals can be copied automatically without having to manually turn them over. Acceptable originals Up to 40 originals ranging from 5-1/2" x 8-1/2" to 11" x 17" and from 15 lbs. to 23 lbs. can be used. The total aggregate thickness must not exceed 5/32".
ページ 年 月 日 木曜日 午後 時 分 COPYING FROM THE RSPF 3 Set the originals face up in the document feeder tray. ● The original size will be indicated in the display, and the paper tray with the corresponding paper size will be automatically selected. ★KEY OPERATOR The auto paper select function can be disabled using a key operator program. If this function has been disabled, use the PAPER SELECT key to select the desired paper tray. See page 15 of the KEY OPERATOR'S GUIDE.
ページ 年 月 日 木曜日 午後 時 分 TWO-SIDED COPYING Two-sided copies can be made by manually placing originals on the platen glass as described in the procedure below. Fully automatic two-sided copies can be made from one-sided originals. Additionally, fully automatic two-sided copying of two-sided originals or one-sided copying of two-sided originals can be made. NOTES: ● Paper sizes that can be used are 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", 11" x 17", A5, B5, B5R, A4, A4R, B4, and A3.
ページ 年 月 日 木曜日 午後 時 分 TWO-SIDED COPYING 3 Use the ● Also and keys to select one-sided to two-sided copying. the 2-SIDED COPY key can be used to select a 2-sided copy mode. COPY MODE 1 to 1 1 2 1 to 2 2 2 2 to 2 BINDING CHANGE OFF 4 2 Use the or the OK key. key to select binding change if desired. Then, press MAKING COPIES ● The image of one side can be rotated 180º using the image rotation feature.
ページ 年 月 日 木曜日 午後 時 分 TWO-SIDED COPYING 2 Press the 2-SIDED COPY key. ● The 2-sided copy mode selection screen will appear. COPY MODE 1 to 1 1 to 2 3 Use the 4 Use the OK key. ● Also and keys to select one-sided to two-sided copying. the 2-SIDED COPY key can be used to select a 2-sided copy mode. MAKING COPIES or key to select binding change if desired. Then, press the COPY MODE 1 to 1 1 to 2 BINDING CHANGE OFF 30 5 Ensure that the desired paper tray is selected.
ページ 年 月 日 木曜日 午後 時 分 TWO-SIDED COPYING 7 Place the second original face down on the platen glass and press the START ( ) key again. ● To stop a copy run during duplex copying, press the CLEAR (C) key. cancel the 2-sided copy mode, press the 2-SIDED COPY key, select the one-sided to one-sided mode, and press the OK key. ● If an uneven number of originals are being copied, press the READ-END key after the last original is scanned. The last copy will be output single-sided.
ページ 年 月 日 木曜日 午後 時 分 TWO-SIDED COPYING 3 Use the and keys to select two-sided to two-sided copying and press the OK key. ● Also the 2-SIDED COPY key can be used to select a 2-sided copy mode. COPY MODE 1 to 1 1 21 to 2 2 22 to 2 4 Set the number of copies and press the START ( ) key. MAKING COPIES ● Be sure not to touch the originals as they move on the reversing tray. This may cause misfeeds. One-sided copies from two-sided originals (Only when a RSPF is being used.
ページ 年 月 日 木曜日 午後 時 分 TWO-SIDED COPYING 2 Press the 2-SIDED COPY key. ● The 2-sided copy mode selection screen will appear. COPY MODE 1 to 1 1 21 to 2 2 22 to 2 3 2 Use the and keys to select two-sided to one-sided copying. MAKING COPIES COPY MODE 1 21 to 2 2 22 to 2 2 12 to 1 BINDING CHANGE OFF 4 Use the OK key. or key to select binding change if desired. Then, press the ● The image of one side can be rotated 180º using the image rotation feature.
ページ 年 月 日 木曜日 午後 時 分 EXPOSURE ADJUSTMENT This copier has four exposure modes to choose from: AUTO, TEXT, TEXT/PHOTO, and PHOTO. Auto This is the standard initial setting for this copier. In this mode, the characteristics of an original being copied are "read" by the exposure system, and exposure adjustments are made automatically. This optimizes the contrast of the copied images by reducing the effect of colored or shaded background areas.
ページ 年 月 日 木曜日 午後 時 分 EXPOSURE ADJUSTMENT 3 Use the ● Copy and keys to adjust the copy density as desired. density cannot be adjusted manually in the AUTO exposure mode. EXPOSURE AUTO AUTO TEXT TEXT/PHOTO 4 2 Press the OK key. return to the AUTO mode, press the EXPOSURE key, use the "AUTO", and press the OK key.
ページ 年 月 日 木曜日 午後 時 分 REDUCTION/ ENLARGEMENT/ZOOM Reduction and enlargement ratios can be selected either automatically with the AUTO IMAGE key or manually with the COPY RATIO key. The zoom function enables precise copy ratio selection from 25% to 400% in 1% increments. NOTE: When using the RSPF, the zoom range is 50% to 200%. Automatic selection ● When the auto image function is enabled, the reduction or enlargement ratio cannot be selected manually.
ページ 年 月 日 木曜日 午後 時 分 REDUCTION/ENLARGEMENT/ZOOM 3 Press the AUTO IMAGE key. ● The 4 Enter the number of copies and press the START ( ) key. ● To cancel the automatic reduction/enlargement mode, press the AUTO IMAGE key again. ● When copying from a RSPF, the automatic reduction/enlargement feature will be effective only for the current copy run. 37 2 MAKING COPIES copy ratio will be automatically set.
ページ 年 月 日 木曜日 午後 時 分 REDUCTION/ENLARGEMENT/ZOOM Manual selection 1 Place an original on the platen glass and close the platen cover. Document feeder tray 2 Press the COPY RATIO key. ● The copy ratio adjustment screen will appear. MAKING COPIES COPY RATIO 121% 100% 95% ZOOM 100% 3 AUTO Use the and keys to select a preset copy ratio or use the keys to select a zoom ratio. and A.Preset reduction ratios are: 95%, 77%, 64%, 50%, and 25%. B.
ページ 年 月 日 木曜日 午後 時 分 REDUCTION/ENLARGEMENT/ZOOM 4 Press the OK key. ● The display will return to the basic screen. Ensure that the desired paper tray is selected. 6 Set the number of copies and press the START ( ● If the auto paper select function has been enabled, the appropriate copy paper size will have been automatically selected based on the original size and the selected copy ratio.
ページ 年 月 日 木曜日 午後 時 分 ROTATION COPYING If rotation of original image is enabled using a key operator program, the image of the original will rotate when the orientation of the original does not match that of the copy paper. Rotation copying will function only if the auto paper select mode or the auto image mode has been selected. Even if rotation of original image is disabled using a key operator program, rotation copying will function when the 2 in 1 or 4 in 1 function is selected.
ページ 年 月 日 木曜日 午後 時 分 BYPASS FEED (special paper) The bypass tray must be used to feed special papers such as transparency film and labels but can also be used to feed standard copy paper. Acceptable paper for copying from the bypass tray Weight Capacity (21 lb. bond paper) Special paper Ordinary paper: 5-1/2" x 8-1/2" to 11" x 17" 14 lbs. to 34 lbs.
ページ 年 月 日 木曜日 午後 時 分 BYPASS FEED (special paper) 2 Set the paper guides to the copy paper width. 3 Insert the copy paper (print face down) all the way into the bypass tray. MAKING COPIES ● For the number of sheets which can be loaded into the tray, see the previous page. adding paper, first remove any paper remaining in the tray, combine it with the paper to be added and then reload as a single stack. The paper to be added must be the same size and type as the paper already in the tray.
ページ 年 月 日 木曜日 午後 時 分 BYPASS FEED (special paper) 5 Set the number of copies and press the START ( ) key. NOTE: The bypass tray can be used to copy onto the two sides of paper manually. When copying the second original, be sure to turn over the copy of the first original left to right and place it into the bypass tray as shown in the illustration.
ページ 年 月 日 木曜日 午後 時 分 INTERRUPTING A COPY RUN INTERRUPT is used to interrupt a long copy run so that another job can be done. ● Two-sided and 2 in 1/ 4 in 1 copying jobs cannot be interrupted. ● Two-sided copying, sort, group, staple sort, job programs and 2 in 1/ 4 in 1 cannot be selected for interrupt copying. Key operator programs cannot be used in the interrupt mode. 1 Press the INTERRUPT ( ) key.
ページ 年 月 日 木曜日 午後 時 分 INTERRUPTING A COPY RUN 5 When all INTERRUPT copies are finished, press the INTERRUPT ( ) key again to cancel the INTERRUPT mode, and remove the original used for interrupt copying. ● All 6 2 settings for the interrupted job will be automatically restored. Replace the original(s) for the interrupted job and press the START ( ) key to resume copying.
ページ 年 月 日 木曜日 INTERRUPTING A COPY RUN MAKING COPIES 46 午後 時 分
ページ 年 月 日 木曜日 午後 時 分 CHAPTER 3 SPECIAL FUNCTIONS This chapter describes special copying functions including various image editing functions. Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Copying in the sort or group mode. . . . . . . . . . . . . . . . . . . . . . . . . 48 ● MARGIN SHIFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 ● ERASE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ 年 月 日 木曜日 午後 時 分 SORT/GROUP The copier has two sorter modes for different copying jobs: one sorts copies into sets matching the sequence of the originals and the second groups copies by originals. Sort mode Sets of copies will be sequentially delivered to the center tray. 1 2 3 3 1 2 3 2 1 1 2 3 Group mode Multiple copies of each original will be grouped in the center tray.
ページ 年 月 日 木曜日 午後 時 分 SORT/GROUP 2 Press the OUTPUT key. ● The output mode selection screen will appear. SORT NO SORT 12 3 SORT 111 GROUP 3 Use the OK key. ● Also and keys to select the desired output mode and press the the OUTPUT key can be used to select an output mode. 3 Make all other desired copier selections and press the START ( key. ) ● If originals have been set in a RSPF in step 1, copying will start. If an original has been set on the platen glass, proceed to the next step.
ページ 年 月 日 木曜日 午後 時 分 SORT/GROUP 6 After all originals have been scanned, press the READ-END key. ● Copying will start. the memory becomes full of scanned original image data, a warning message will appear. Press the START ( ) key to start copying the data in memory or the CLEAR ALL (CA) key to cancel copying. ● The memory can be extended to a maximum of 272 MB to increase the capacity for storing image data by adding commercially available memory modules.
ページ 年 月 日 木曜日 午後 時 分 MARGIN SHIFT The MARGIN SHIFT feature, in its initial setting, automatically shifts the text or image to increase the margin by approximately 1/2". Original Increased Copy margin A A Original A Copy A Original Copy A A Increased margin Increased margin ● The location of the margin to be increased can be selected at the left edge, the right edge or the top edge of the page. To select the location, see step 4 overleaf.
ページ 年 月 日 木曜日 午後 時 分 MARGIN SHIFT 3 Press the OK key. ● The setting screen for MARGIN SHIFT will appear. MARGIN SHIFT OFF DOWN RIGHT 1/2 inch(1/4~1) 4 Use the and keys to select the shift direction and the to select the shift amount. ● Select ● Select SPECIAL FUNCTIONS 5 the shift direction from DOWN, RIGHT, and LEFT. the shift amount from 1/4", 1/2", 3/4", and 1". display will return to the basic screen. Make all other desired copier selections and press the START ( key.
ページ 年 月 日 木曜日 午後 時 分 ERASE This copier has an edge erase mode and a center erase mode. Center erase Edge erase AB A A Edge + Center erase AB AB AB ● Edge erase can be used to eliminate shadow lines around the edges of copies which appear when thick paper or a book is used as an original. ● Center erase can be used to eliminate the shadow produced by the bindings of bound documents. ● Edge + center erase can be used together to eliminate both types of shadow lines.
ページ 年 月 日 木曜日 午後 時 分 ERASE 4 Use the 5 Use the 6 Press the OK key. ● Select SPECIAL FUNCTIONS ● The 7 keys to select the desired erase mode. "EDGE", "CENTER" or "EDGE + CENTER". and keys to adjust the amount of erase if needed. display will return to the basic screen. Make all other desired copier selections and press the START ( key. ● To 54 and cancel the erase feature, select the erase feature again and select "OFF".
ページ 年 月 日 木曜日 午後 時 分 DUAL PAGE COPY The DUAL PAGE COPY feature produces individual copies of two documents placed side by side on the platen glass. It is especially useful when copying books and other bound documents. Original Copy ● This feature can be used in the one-sided to two-sided copying mode. feature cannot be used with the 2 in 1 / 4 in 1, center erae, edge+center erase, enlargement or staple sort features.
ページ 年 月 日 木曜日 午後 時 分 DUAL PAGE COPY 3 Use the key. and keys to select "DUAL PAGE COPY" and press the OK SPECIAL MODES MARGIN SHIFT ERASE DUAL PAGE COPY [OK]:OFF ON ●A check mark will appear to the left of "DUAL PAGE COPY", and the display will return to the basic screen. 4 Check to be sure that 8-1/2" x 11" sized copy paper is selected. 5 Make all other desired copier selections and press the START ( key.
ページ 年 月 日 木曜日 午後 時 分 2 IN 1 OR 4 IN 1 The 2 in 1 or 4 in 1 feature is used to copy 2 or 4 originals, collectively in a specified order, onto one sheet. 2 in 1 copying Pattern Pattern Pattern Pattern Pattern Pattern Pattern 4 in 1 copying Pattern ● These features cannot be used with the dual page copying, XY zoom, erase or margin shift features. ● Copies can be made with or without the border lines. ● The order of originals which will be arranged on the copies can be selected.
ページ 年 月 日 木曜日 午後 時 分 2 IN 1 OR 4 IN 1 3 Press the SPECIAL FUNCTION key. Then press the OK key. ● The SPECIAL MODES screen will appear. SPECIAL MODES MARGIN SHIFT ERASE DUAL PAGE COPY [OK]:ADJUST 4 Use the ● The and keys to select "2in1/4in1" and press the OK key. selection screen for 2 in 1 / 4 in 1 will appear. 2in1/4in1 OFF 2in1 4in1 [OK]:CHANGE----SPECIAL FUNCTIONS 5 Use the ● The and keys to select "2in1" or "4in1" and press the OK key.
ページ 年 月 日 木曜日 午後 時 分 2 IN 1 OR 4 IN 1 7 Use the ● Select and keys to select a type of border line. the solid line, broken line or no border line. 2in1 PATTERN 1 BORDER 8 Press the OK key. 3 ● The Make all other desired copier selections and press the START ( key. ● The copy ratio will be calculated automatically. ● If a RSPF is used, copying will start after originals are ● If the platen glass is used, proceed to the next step. ) scanned.
ページ 年 月 日 木曜日 午後 時 分 B/W REVERSE The B/W REVERSE feature is used to reverse black and white areas. Original Copy ● When the B/W REVERSE feature is selected, the exposure mode will be automatically set to the TEXT mode. Other exposure modes cannot be selected. Even if this feature is canceled, the TEXT mode will not automatically be canceled. 1 Place an original on the platen glass or in the document feeder tray. Document feeder tray 2 Press the SPECIAL FUNCTION key. Then press the OK key.
ページ 年 月 日 木曜日 午後 時 分 B/W REVERSE 4 Make all other desired copier selections and press the START ( key. ) ● To cancel the B/W reverse feature, highlight "B/W REVERSE" with a check mark on the SPECIAL MODES screen and press the OK key.
ページ 年 月 日 木曜日 午後 時 分 XY ZOOM The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed independently. Example: Reduction only in the horizontal direction Original Copy ● This feature cannot be used with the 2 in 1 or 4 in 1 feature. use the XY ZOOM feature with the DUAL PAGE COPY feature, set the DUAL PAGE COPY feature first and then the XY ZOOM feature. (Enlargement cannot be set.) ● The copy ratios can be set from 25% to 400%.
ページ 年 月 日 木曜日 午後 時 分 XY ZOOM 3 Use the and keys to select "XY ZOOM" and press the OK key. ● The setting screen for XY ZOOM will appear. The copy ratio in the horizontal direction will be highlighted. XY ZOOM 121% ZOOM 100% X: 100% 95% Y: 100% [ ]:X Y 4 Use the , , direction. , and keys to change the copy ratio in the horizontal 3 the and keys to set the approximate ratio, then press the ratio or key to increase the ratio. 5 Press the ● The key to decrease the key.
ページ 年 月 日 木曜日 午後 時 分 XY ZOOM 7 Press the OK key. ● The display will return to the basic screen. Ready to copy. 81/2 11R AUTO X121% Y 99% 81/2 14 AUTO 8 Ensure that the desired paper tray is selected. 9 Make all other desired copier selections and press the START ( key. ● If the auto paper select function has been enabled, the appropriate copy paper size will have been automatically selected based on the original size and the selected copy ratios. Image rotation may occur.
ページ 年 月 日 木曜日 午後 時 分 TRANSPARENCY The TRANSPARENCY feature is used to copy onto transparency film. ● When copying onto transparency film, use this feature to obtain better copy quality. When this feature is selected, the bypass tray will be automatically selected and "TRANSPARENCY" will appear in the paper size display. ● This feature cannot be used with duplex copying or staple sort copying. ● Recommended transparency film is SF-85A.
ページ 年 月 日 木曜日 午後 時 分 TRANSPARENCY 4 Load transparency film into the bypass tray. 5 Make all other desired copier selections and press the START ( key. ● Load ● To transparency film one sheet at a time in the portrait orientation. ) cancel the transparency feature, highlight "TRANSPARENCY" with a check mark on the SPECIAL MODES screen and press the OK key.
ページ 年 月 日 木曜日 午後 時 分 JOB MEMORY Nine frequently used job programs can be stored in each of nine storage registers. This is convenient for quick job recall without losing time manually reprogramming each aspect of a job. ● The following functions cannot be stored in the job memory: copy quantity, original size, document station (platen glass or document feeder tray), paper size, interrupt, extra image adjustment.
ページ 年 月 日 木曜日 午後 時 分 JOB MEMORY 4 Select a program number from 1 to 9 using the numeric keys. ●A screen indicating that the settings have been stored will appear and then the display will return to the basic screen. ● The numbers with a check mark are program numbers which already contain job programs. If a program number containing a job program is entered, the message "Storage number selected is already used. Replace it?" will appear to confirm the selection.
ページ 年 月 日 木曜日 午後 時 分 JOB MEMORY 3 Select a program number from 1 to 9 using the numeric keys. ● The numbers with a check mark are program numbers which contain job programs. If a checked number is entered, the message "Delete job program?" will appear to confirm the selection to delete the program. To delete the program, select "YES" with the and keys and press the OK key. ● If "NO" is selected, the previous screen will reappear. Recalling a job program 1 3 Press the PROGRAM key.
ページ 年 月 日 木曜日 午後 時 分 JOB MEMORY 3 Select a program number from 1 to 9 using the numeric keys. ● The numbers with a check mark are program numbers which contain job programs. If a checked number is entered, the settings for that job program will be recalled and the display will return to the basic screen. ● The recalled settings may be modified for a particular job run, but any changes made will not be stored in the job memory.
ページ 年 月 日 木曜日 午後 時 分 CHAPTER 4 COPIER TROUBLE? This chapter describes how to remove misfed paper and how to remedy minor problems. Page MESSAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 ● MISFEED REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Misfeed in the RSPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Misfeed in the bypass tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ 年 月 日 木曜日 午後 時 分 STATUS MESSAGES If any of the following messages appears in the display, carry out the prescribed remedy. Message (Maintenance icon) Remedy Maintenance required soon. Service by an authorized SHARP service technician will be required soon. Contact your service center as soon as possible. (This message will be displayed if the information key is pressed when the information ( ) icon is displayed.) Maintenance required. Call for service.
ページ 年 月 日 木曜日 午後 時 分 MISFEED REMOVAL When a misfeed occurs, the copier will stop. The message "Clear paper path." will appear in the display along with an illustration showing paper misfeed locations. ● If paper becomes accidentally torn during removal, be sure to remove all pieces. Be careful not to damage the photoconductive drum. ● For misfeeds in optional equipment, see their respective sections of the operation manual.
ページ 年 月 日 木曜日 午後 時 分 MISFEED REMOVAL Location B ● Open the document feeder cover, rotate the rollers in the direction indicated by the arrow to feed the misfed paper, and then gently remove the misfed original after closing the document feeder cover. Rollers ● If a small original such as 5-1/2" x 8-1/2" original has misfed or an original has misfed in the reversing tray, open the right side cover and gently remove the misfed original. Close the right side cover.
ページ 年 月 日 木曜日 午後 時 分 MISFEED REMOVAL 2 Open and close the document feeder cover to cancel the misfeed display. ● You can also cancel the misfeed display by opening and closing the feeding roller cover or the right side cover. ● The number of originals that must be returned to the document feeder tray will be indicated in the display. 3 Return the indicated number of originals to the document feeder tray and press the START ( ) key to resume copying.
ページ 年 月 日 木曜日 午後 時 分 MISFEED REMOVAL Misfeed in the copier Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If the misfed paper is seen from this side, proceed to “C. Misfeed in the transport area”. If paper is misfed here, proceed to “A. Misfeed in the paper feed area”. A. Misfeed in the paper feed area COPIER TROUBLE? 76 1 Open the bypass tray and the side cover. 2 Gently open the front cover.
ページ 年 月 日 木曜日 午後 時 分 MISFEED REMOVAL 3 Carefully remove the misfed paper. Turn the roller rotating knob in the direction of the arrow to assist in removing it. Roller rotating knob WARNING: The fusing unit is hot. Take care in removing paper. CAUTION: Do not touch the photoconductive drum (green portion) when removing the misfed paper. Doing so may damage the drum and cause smudges on copies. 4 Close the front cover and the side cover. ● Confirm 4 that the misfeed display has been cleared.
ページ 年 月 日 木曜日 午後 時 分 MISFEED REMOVAL 3 Turn the roller rotating knob in the direction of the arrow. Roller rotating knob 4 Carefully remove the misfed paper. Lower the fusing unit release levers to allow easier removal. After removal, return the release levers to their operating positions. Fusing unit release levers WARNING: The fusing unit is hot. Take care in removing paper. CAUTION: not touch the photoconductive drum (green portion) when removing the misfed paper.
ページ 年 月 日 木曜日 午後 時 分 MISFEED REMOVAL C. Misfeed in the transport area 1 Open the bypass tray and the side cover. 2 Use the green tabs on either side of the paper guide to rotate the guide open and remove the misfed paper. WARNING: The fusing unit is hot. Take care in removing paper. 3 Close the side cover. ● Confirm 4 that the misfeed display has been cleared. COPIER TROUBLE? Misfeed in the center tray 1 Remove the paper by pulling it into the center tray.
ページ 年 月 日 木曜日 午後 時 分 MISFEED REMOVAL Misfeed in the upper paper tray Before opening the upper paper tray, be sure to open the bypass tray and the side cover and then perform steps 1 to 3 described in the "A. Misfeed in the paper feed area" section. 1 Pull out the upper paper tray and remove the misfed paper. 2 Close the paper tray. 3 Open and close the side cover to cancel the misfeed display. COPIER TROUBLE? ● You can also cancel the misfeed display by opening and closing the front cover.
ページ 年 月 日 木曜日 午後 時 分 MISFEED REMOVAL 2 Remove the misfed paper. ● Be 3 careful not to tear the misfed paper during removal. If the misfed paper is not seen in step 2, pull out the lower paper tray and remove the misfed paper. ● Be careful not to tear the misfed paper during removal. 4 Close the paper tray. 5 Close the lower side cover. COPIER TROUBLE? ● Confirm 4 that the misfeed display has been cleared.
ページ 年 月 日 木曜日 午後 時 分 MISFEED REMOVAL COPIER TROUBLE? 82 2 Gently pull the misfed paper out. 3 Close the upper exit area cover. ● Confirm that the misfeed display has been cleared.
ページ 年 月 日 木曜日 午後 時 分 TROUBLESHOOTING Always check the message display whenever the copier stops during an operation or operation is not possible. Messages in the display will give you easy-to-follow directions. For other troubles not described by messages, check the chart below. Problem Copier does not operate. Solution Copier plugged in? Plug the copier into a grounded outlet as specified. See page 97. ● Power switch ON? Turn the power switch ON. See page 16. Copies are too dark or too light.
ページ 年 月 日 木曜日 午後 時 分 TROUBLESHOOTING Problem Copies are smudged or dirty. Solution ● Platen glass or platen cover dirty? Clean regularly. See page 93. ● Original smudged or blotchy? Use a clean original. Black or white stripes appear on copies. ● Is the scanning window of a RSPF dirty? Clean the scanning window. Paper size for a paper tray cannot be set. ● Is the COPY indicator off? Press the COPY key to select the COPY mode. See page 14.
ページ 年 月 日 木曜日 午後 時 分 CHAPTER 5 GENERAL INFORMATION This chapter describes general information about the use of the copier and the loading of paper and toner. Page ● PAPER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Types and sizes of copy paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Loading copy paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Changing the copy paper size in the tray . . . . . . . .
ページ 年 月 日 木曜日 午後 時 分 PAPER Types and sizes of copy paper Types and sizes of copy paper which can be fed from the paper trays are shown below. For paper acceptable for feeding from the bypass tray, see page 41. Size Weight Capacity (21 lb. bond paper) 5-1/2" x 8-1/2" to 11" x 17" 15 lbs. to 21 lbs. 500 sheets A5 to A3 ● 5-1/2" x 8-1/2" and A5 copy papers cannot be fed from any tray except the uppermost tray.
ページ 年 月 日 木曜日 午後 時 分 PAPER 3 Move the left guide to the appropriate slot as marked on the tray. 4 Fan the copy paper and insert it into the tray. ● When using 11" x 17" copy paper, store the left guide in the slot at the left front of the paper tray. Maximum height line ● Set the paper along the guides. tray holds up to 500 sheets of 21 lb. bond paper. ● Do not load paper above the maximum height line. ● The Push the paper tray firmly back into the copier.
ページ 年 月 日 木曜日 午後 時 分 PAPER Changing the copy paper size in the tray Paper size setting can only be done while the machine is not operating and the COPY mode has been selected. ● B5 paper cannot be set for paper tray 2. 1 Press the SPECIAL FUNCTION key. ● The SPECIAL FUNCTION screen will appear. SPECIAL FUNCTION SPECIAL MODES ORIG. SIZE ENTER PAPER SIZE SET DISPLAY CONTRAST 2 Use the key. ● The and keys to select "PAPER SIZE SET" and press the OK paper size setting screen will appear.
ページ 年 月 日 木曜日 午後 時 分 PAPER 5 Use the ● To 6 keys to select the paper size that has been set. change the size of another paper tray, press the key and then repeat steps 3 to 5. Press the OK key. ●A 7 and confirmation message for paper size setting will appear. Press the OK key. ● The specified paper size will be registered and the display will return to the basic screen.
ページ 年 月 日 木曜日 午後 時 分 TONER CARTRIDGE REPLACEMENT The approximate quantity of toner remaining can be displayed by pressing and holding the COPY key during standby or warm-up. See page 92. When the quantity of toner remaining is less than 25%, obtain a new cartridge. When the toner cartridge replacement required icon ( ) appears in the display, replacement of the toner cartridge will be needed soon. If you press the information key, the message "Toner is low." will appear in the display.
ページ 年 月 日 木曜日 午後 時 分 TONER CARTRIDGE REPLACEMENT 3 Remove the new toner cartridge from the bag. Grasp the cartridge on both sides and shake it horizontally approximately 20 times. After shaking the cartridge, remove the tape. NOTE: Grasp the grip when holding the cartridge. Do not hold the cartridge by the shutter. Be sure to only shake the cartridge before the tape is removed. Approx.
ページ 年 月 日 木曜日 午後 時 分 CHECKING THE TONER QUANTITY AND TOTAL OUTPUT COUNT The approximate quantity of toner remaining and the total output count can be displayed by the procedure below. The total count value displayed is the output count in the copy, print, and fax modes including the output count by the self-print function of the printer and facsimile features. 1 Press and hold the COPY key during standby or warm-up.
ページ 年 月 日 木曜日 午後 時 分 CLEANING THE PLATEN GLASS AND RSPF Proper care is essential for clean, sharp copies. Please take a few minutes to regularly clean your copier. Stains or dirt on the platen glass or RSPF will also be copied. Wipe the platen glass, platen cover portion of the RSPF and the scanning window on the platen glass with a soft, clean cloth. ● If necessary, dampen the cloth with water. Do not use thinner, benzene, or similar volatile cleaning agents.
ページ 年 月 日 木曜日 午後 時 分 CLEANING THE BYPASS TRAY PAPER FEED ROLLER If misfeeds occur frequently when feeding postcards, envelopes, thick paper, etc. through the bypass tray, wipe the paper feed roller at the feed slot of the bypass tray with a soft, clean cloth dampened with alcohol or water.
ページ 年 月 日 木曜日 午後 時 分 DISPLAY CONTRAST ADJUSTMENT The contrast of the display can be adjusted as below. 1 Press the SPECIAL FUNCTION key. ● The SPECIAL FUNCTION screen will appear. SPECIAL FUNCTION SPECIAL MODES ORIG. SIZE ENTER PAPER SIZE SET DISPLAY CONTRAST 2 Use the OK key. ● The and keys to select "DISPLAY CONTRAST" and press the screen for contrast setting will appear. DISPLAY CONTRAST 3 Use the and keys to adjust the contrast.
ページ 年 月 日 木曜日 午後 時 分 STORAGE OF SUPPLIES Standard supplies for this copier that are to be replaced by the user are copy paper, toner cartridge, and staple cartridge for the optional finisher (AR-FN5 N). For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of SHARP copiers. Look for the Genuine Supplies label on the toner package.
ページ 年 月 日 木曜日 午後 時 分 SPECIFICATIONS Type Desktop Copy system Dry, electrostatic transfer Originals Sheets, bound documents Original sizes Max. 11" x 17" Copy sizes Max. 11" x 17", Min. 5-1/2" x 8-1/2" Image loss: Max. 5/32" (4 mm) (leading and trailing edges), Max. 1/8" (3 mm) (along other edges) Copying speed (one-sided copying at 100% copy ratio) 600 dpi : 20 copies/min. (8-1/2" x 11") 00 copies/min. (8-1/2" x 11"R) 00 copies/min. (8-1/2" x 14") 00 copies/min.
ページ 年 月 日 木曜日 午後 時 分 SPECIFICATIONS Noise level Sound Power Level LWA Copying: 6.3 [B], Standby: 3.9 [B] Sound Pressure Level LPA (bystander positions) Copying: 49 [dB (A)], Standby: 24 [dB (A)] Noise emission measurement in accordance with ISO 7779. Ozone: 0.02 mg/m3 or less Emission concentration (measurement according to RAL-UZ 62) Dust: 0.075 mg/m3 or less Optional equipment Finisher (AR-FN5 N) Styrene: 0.
ページ 年 月 日 木曜日 午後 時 分 CHAPTER 6 OPTIONAL EQUIPMENT This chapter describes operating instructions for the Single Pass Feeder (AR-SP4), the Reversing Single Pass Feeder (AR-RP3), the Finisher (AR-FN5 N), the 500-Sheet Paper Feed Unit (AR-D11), and the 2 x 500-Sheet Paper Feed Unit (AR-D12). Page CONFIGURATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 ● FINISHER (AR-FN5 N) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Part names . . . . . . . . . . . . . . . . . .
ページ 年 月 日 木曜日 午後 時 分 SYSTEM CONFIGURATION A number of options are available for the copier which allow you to configure a copier system to meet your particular needs. The options include the following.
ページ 年 月 日 木曜日 午後 時 分 FINISHER (AR-FN5 N) The copier has two different finisher modes: one sorts copies into sets matching the sequence of the originals and the second groups copies by original. When an optional finisher (AR-FN5 N) is installed, the copier can automatically staple the sorted copies. Each collated set of copies or group of copies can be stacked offset from the previous set.
ページ 年 月 日 木曜日 午後 時 分 FINISHER (AR-FN5 N) Specifications Tray capacity Top tray: 100 sheets Offset tray: 1,000 sheets (500 sheets for sizes larger than 8-1/2" x 11") Paper size Top tray: 5-1/2" x 8-1/2" to 11" x 17" Offset tray: 8-1/2" x 11" to 11" x 17" Paper weight Top tray: 15 lbs. to 21 lbs. Offset tray: 15 lbs. to 21 lbs. Offset Approx. 1 inch Paper sizes that can be stapled 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", 11" x 17" Stapling capacity 30 sheets (20 lbs.
ページ 年 月 日 木曜日 午後 時 分 FINISHER (AR-FN5 N) Finisher functions When the finisher is installed, the following four output modes can be selected: sort, staple sort, group, and non-sort. Press the OUTPUT key, use the and keys (or the OUTPUT key) to select the desired output mode, and then press the OK key. When copying in the sort or group mode, the output tray can be selected using the and keys and pressing the OK key.
ページ 年 月 日 木曜日 午後 時 分 FINISHER (AR-FN5 N) Staple sort In the staple sort mode, 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", and 11" x 17" (B5, A4, A4R, B4, and A3) size copies can be stapled. NOTE: Different size originals cannot be copied onto copy paper of their respective sizes in the staple sort mode. Using the RSPF 1 Set the originals in the document feeder tray. Stapling position ● If the number of copies in one set is more than 30, the copies will not be stapled.
ページ 年 月 日 木曜日 午後 時 分 FINISHER (AR-FN5 N) 3 Use the 4 Set the number of copies and press the START ( ● Also and keys to select "STAPLE SORT" and press the OK key. the OUTPUT key can be used to select an output mode. ) key. ● When copying of a set is completed, the copies will be automatically stapled and delivered to the offset tray. Using the platen glass 1 Set an original face down on the platen glass with the corner to be stapled to the upper right position.
ページ 年 月 日 木曜日 午後 時 分 FINISHER (AR-FN5 N) 2 Press the OUTPUT key. ● The output mode selection screen will appear. OUTPUT NO SORT 12 3 SORT STAPLE SORT EXIT CENTER OPTIONAL EQUIPMENT 106 3 Use the 4 Set the number of copies and press the START ( 5 Replace the scanned original with the next original and press the START ( ) key after it lights up. Repeat this step until all originals have been scanned. ● Also and keys to select "STAPLE SORT" and press the OK key.
ページ 年 月 日 木曜日 午後 時 分 FINISHER (AR-FN5 N) 6 After all originals have been scanned, press the READ-END key. ● Copying will start and each set of completed copies will be automatically stapled and delivered to the offset tray. ● If the message "Can not continue. Remove paper from the offset tray." appears in the display, remove the copies from the offset tray. Staple cartridge replacement When the message "Add staples." appears, replace the staple cartridge as follows: 1 Open the stapler cover.
ページ 年 月 日 木曜日 午後 時 分 FINISHER (AR-FN5 N) 4 Insert the new staple cartridge into the box until it clicks into place. ● Insert the new cartridge by aligning the arrows on the cartridge with those on the box. Check that the cartridge locks in place by pulling it slightly. ● A cartridge holds 3,000 staples. 5 Remove the tape from the cartridge. 6 Insert the staple box into the stapler unit until it clicks into place. 7 Close the stapler cover.
ページ 年 月 日 木曜日 午後 時 分 FINISHER (AR-FN5 N) 2 Grasp the green portion of the staple box and remove the staple box from the stapler. 3 Raise the lever at the end of the staple box and remove the jammed staples. 4 Return the lever to its original position. 5 Insert the staple box into the stapler unit until it clicks into place. 6 Close the stapler cover.
ページ 年 月 日 木曜日 午後 時 分 FINISHER (AR-FN5 N) Misfeed removal The copier will stop when a misfeed occurs. The message "Clear paper path." will appear along with a display of paper misfeed locations. When a misfeed is indicated for the finisher, follow the procedure below. OPTIONAL EQUIPMENT 110 1 Pull the handle of the stapler compiler cover and open the cover. 2 Remove any misfed paper from the transport area.
ページ 年 月 日 木曜日 午後 時 分 FINISHER (AR-FN5 N) 4 Close the stapler compiler cover. 5 If the offset tray is being used, remove any misfed paper from the offset tray. 6 If the top tray is being used, open the top cover, remove any misfed paper, and close the top cover. ● Confirm that the misfeed display has been cleared.
ページ 年 月 日 木曜日 午後 時 分 500-SHEET PAPER FEED UNIT (AR-D11)/2x500-SHEET PAPER FEED UNIT (AR-D12) These paper feed units provide the convenience of increased paper capacity for the copier and a greater choice of paper sizes readily available for copying. The AR-D11 contains one 500-sheet paper tray and the AR-D12 contains two 500-sheet paper trays.
ページ 年 月 日 木曜日 午後 時 分 500-SHEET PAPER FEED UNIT (AR-D11)/2x500-SHEET PAPER FEED UNIT (AR-D12) Loading copy paper The method of loading copy paper for these paper feed units is the same as for the paper trays in the copier. See page 86. Changing the copy paper size in the tray The method of changing the copy paper size is the same as for the paper trays in the copier. See page 88. Misfeed removal The copier will stop when a misfeed occurs. The message "Clear paper path.
ページ 年 月 日 木曜日 午後 時 分 500-SHEET PAPER FEED UNIT (AR-D11)/2x500-SHEET PAPER FEED UNIT (AR-D12) OPTIONAL EQUIPMENT 114 2 Pull out the paper tray which was in use. 3 Remove any misfed paper. 4 Close the paper tray. 5 Close the side cover. ● Confirm that the misfeed display has been cleared.
ページ 年 月 日 木曜日 午後 時 分 INDEX 2 E 2 in 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 2x500-sheet paper feed unit . . . . . . . . . . . . . 112 Edge erase . . . . . . . . . . . . . . . . . . . . . . . . . . . Enlargement . . . . . . . . . . . . . . . . . . . . . . . . . . Erase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exposure adjustment . . . . . . . . . . . . . . . . . . . . Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ 年 月 日 木曜日 午後 時 分 INDEX N S Names – operation panel . . . . . . . . . . . . . . . . . . . . . . 14 – part. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Non-sort . . . . . . . . . . . . . . . . . . . . . . . . . . 49, 103 Sort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 103 Special paper. . . . . . . . . . . . . . . . . . . . . . . . . . 41 Specifications – 500-sheet paper feed unit/2x500-sheet paper feed unit. . . . . . . . . . . . . . . . . . . . . .
ページ 年 月 日 木曜日 午後 時 分 MATERIAL SAFETY DATA SHEET Date Issued : Apr. 2. 2001 MSDS NO. F-00981 1. PRODUCT AND COMPANY IDENTIFICATION Product Name : AR-270NT/270T/270ST/270FT/270NT-J/270ST-C/270FT-T (Black Toner) Supplier Identification : Sharp Corporation 22-22 Nagaike-cho, Abeno-ku, Osaka, Japan Local suppliers are listed below. Please contact the nearest supplier for additional information. (Country) U.S.A.
ページ 年 月 日 木曜日 午後 時 分 5. FIRE -FIGHTING MEASURES Extinguishing Media : water, CO2, foam and dry chemicals Special Fire fighting Procedures : None Fire and Explosion Hazards : Toner material, like most finely divided organic powders, may form an explosive mixture. 6. ACCIDENTAL RELEASE MEASURES Personal Precautions : None Environmental Precautions: None Methods for Cleaning Up : Wipe off with paper or cloth. DO not use vacuum cleaner when a large amount is released.
ページ 年 月 日 木曜日 午後 時 分 10. STABILITY AND REACTIVITY : Stability Hazardous Reactions : Conditions to avoid : Materials to avoid : Hazardous Decomposition Products : Further Information : Stable Dust explosion, like most finely divided organic powders. Electric discharge, throwing into fire. Oxidizing Materials CO, CO2 and NOx None 11.
ページ 年 月 日 木曜日 午後 時 分 15. REGULATORY INFORMATION US Information TSCA (Toxic Substances Control Act): All chemical substances in this product comply with all applicable rules or order under TSCA.
ページ 年 月 日 木曜日 午後 時 分 Date Issued : Apr. 2. 2001 MSDS NO. F-30981 1. PRODUCT AND COMPANY IDENTIFICATION Product Name : AR-270ND/270DV/270SD/270SD-C (Black Developer) Supplier Identification : Sharp Corporation 22-22 Nagaike-cho, Abeno-ku, Osaka, Japan Local suppliers are listed below. Please contact the nearest supplier for additional information. (Country) U.S.A.
ページ 年 月 日 木曜日 午後 時 分 5. FIRE -FIGHTING MEASURES Extinguishing Media : water, CO2, foam and dry chemicals Special Fire fighting Procedures : None Fire and Explosion Hazards : Like most finely divided organic powders, it may form an explosive mixture. 6. ACCIDENTAL RELEASE MEASURES Personal Precautions : None Environmental Precautions: None Methods for Cleaning Up : Wipe off with paper or cloth. DO not use vacuum cleaner when a large amount is released.
ページ 年 月 日 木曜日 午後 時 分 10. STABILITY AND REACTIVITY : Stability Hazardous Reactions : Conditions to avoid : Materials to avoid : Hazardous Decomposition Products : Further Information : Stable Dust explosion, like most finely divided organic powders. Electric discharge, throwing into fire. Oxidizing Materials CO, CO2 and NOx None 11.
ページ 年 月 日 木曜日 午後 時 分 15. REGULATORY INFORMATION US Information TSCA (Toxic Substances Control Act): All chemical substances in this product comply with all applicable rules or order under TSCA.
ページ 年 月 日 木曜日 午後 時 分 WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
ページ 年 月 日 木曜日 午後 時 分 AR-M208 SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135.
