AR-M230/M270 Series Online Manual (for network printer) Start Click this "Start" button.
Introduction This manual describes the printer function of the AR-M230/M270 series digital multifunctional system. ● Note For information on loading paper, replacing toner cartridges, clearing paper misfeeds, handling peripheral devices, and other copier-related information, please refer to your operation manual for copier. ● The machine's default settings and default settings for the printer function can be changed using the key operator programs. For more information, see the key operator's guide.
How to use the online manual This section explains how to view the online manual. Please read this section before using the online manual. For information on using Acrobat Reader, see Acrobat Reader Help. How to Control the Online Manual Following Links In this manual, the following buttons are displayed at the bottom of each page. Click these buttons to move quickly to pages that you wish to view. This manual uses a link function that allows you to jump to a related page.
Contents Introduction How to use the online manual (part 1) 2 3 2 ADVANCED PRINTING (WINDOWS) Print hold function Printing using the print hold function 1 PRINTING FROM WINDOWS Basic printing When "Paper Selection" is set to "Auto Select" When the "Paper Selection" setting is "Paper Source" or "Paper Type" ● Auditing mode ● About the "No Offset" function setting ● Opening the printer driver from the "start" button Printer driver settings Two-sided printing ● Pamphlet style How to Print a Watermark ●
Contents (part 2) Giving priority to a print job / Canceling a print job ● ● Giving priority to a print job Canceling a print job 36 36 37 Configuring the printer condition settings ● How to configure the settings ● Printer condition setting menu ● Printer condition settings Printing the printer setting and font lists The printed image is distorted ● Part of the printed image is missing If a notice page is printed ● Disabling notice page printing Removing the software 38 38 40 41 46 ● ● I N D E
PRINTING FROM WINDOWS 1 Basic printing (part 1) The following example explains how to print a document from WordPad. Before printing, make sure that the correct size of paper for your document has been loaded in the machine. 1 Make sure that the ON LINE indicator on the operation panel is lit. COPY PRINT ON LINE DATA SCAN DATA If the ON LINE indicator is not on, press the [PRINT] key to switch to printer mode and then touch the [ONLINE] key.
PRINTING FROM WINDOWS 1 5 Basic printing Click the "Print" button ("OK" button in Windows 95/98/Me/NT 4.0). Printing begins. The print job is delivered to one of the following trays (depending on which output devices are installed): ● Job separator tray kit is installed: Upper tray ● Finisher is installed: Center tray ● Note The output tray can be selected in the key operator programs (see "OUTPUT TRAYS" in the key operator's guide).
1 PRINTING FROM WINDOWS Basic printing (part 3) When the "Paper Selection" setting is "Paper Source" or "Paper Type" When "Paper Selection" in the "Paper" tab of the printer driver setup screen is set to: ● "Paper Source", select the tray that you wish to use for printing from the pull-down menu. ● "Paper Type", select the type of paper that you wish to use for printing from the pull-down menu.
1 PRINTING FROM WINDOWS Basic printing (part 4) Auditing mode When "AUDITING MODE" is enabled in the key operator programs, a 5-digit account number must be entered in the printer driver setup screen in order to print. Account numbers are stored in the key operator programs. (See "ACCOUNT CONTROL" in the key operator's guide.) To open the account number entry screen, click the "Job Control" button in the "Main" tab of the printer driver.
1 PRINTING FROM WINDOWS Opening the printer driver from the "start" button Printer driver settings can be configured by opening the printer driver from the Windows "start" button. Settings adjusted in this way will be the initial settings when you print from an application. (If you change the settings in the printer driver setup screen at the time of printing, the settings will revert to the initial settings when you quit the application.) Windows 2000/XP 1 Windows 95/98/Me/NT 4.
1 PRINTING FROM WINDOWS Printer driver settings To view Help for a setting, click the button in the upper right-hand corner of the window and then click the setting. Some restrictions exist on the combinations of settings that can be selected in the printer driver setup screen. When a restriction is in effect, an information icon ( ) will appear next to the setting. Click the icon to view an explanation of the restriction.
1 PRINTING FROM WINDOWS Two-sided printing (part 1) This feature allows you to print on both sides of the paper. To use this function, open the printer driver setup screen and select "2-Sided (Book)" or "2-Sided (Tablet)" from "Document Style" in the "Main" tab. ☞See Basic printing for details on how to open the printer driver. ● Note Paper sizes that can be used for two-sided printing are Ledger, Letter, Letter-R, Legal, A3, A4, A4R, A5, B4, B5, B5R, and Foolscap.
1 PRINTING FROM WINDOWS Two-sided printing (part 2) Pamphlet style Pamphlet style prints two pages each on the front and back of each sheet of paper (four pages total on one sheet) so that the sheets can be folded down the center and bound to create a pamphlet. This function is convenient when you wish to compile printed pages into a pamphlet. To use this function, open the printer driver and select "Tiled Pamphlet" or "2-Up Pamphlet" in "Document Style" in the "Main" tab.
1 PRINTING FROM WINDOWS Printing multiple pages on one page This feature allows you to reduce and print two, four, six, eight or sixteen document pages on a single sheet of paper. To use this function, open the printer driver setup screen and select the number of pages per sheet (2-Up, 4-Up, 6-Up, 8-Up, or 16-Up) in "N-Up Printing" in the "Main" tab. The order of the pages can be changed in the "Order" menu. ☞See Basic printing for details on how to open the printer driver.
PRINTING FROM WINDOWS 1 Fitting the printed image to the paper The printer driver can adjust the size of the printed image to match the size of the paper loaded in the machine. Follow the steps shown below to use this function. The explanation below assumes that you intend to print a Ledger size document on letter size paper. ☞See Basic printing for details on how to open the printer driver. Note 1 The "Fit To Paper Size" setting is not available when "N-Up Printing" is selected.
1 PRINTING FROM WINDOWS Rotating the print image 180 degrees The print image can be rotated 180 degrees. This feature is used to enable correct printing on envelopes and other paper with flaps that can only be loaded in one orientation. Use this feature when automatic rotation (which takes place when the loaded paper is the same size as the print image and the orientations are different) results in reversal of the top and bottom of the image.
1 PRINTING FROM WINDOWS Printing a watermark You can print a watermark such as "CONFIDENTIAL" on your document. To print a watermark, open the printer driver, click the "Watermarks" tab, and follow the steps below. ☞See Basic printing for details on how to open the printer driver. How to Print a Watermark From the "Watermark" drop-down list, select the watermark that you wish to print (for example "CONFIDENTIAL"), and start printing. Print sample You can enter text to create your own custom watermark.
1 PRINTING FROM WINDOWS Stapling printed pages (when a finisher is installed) (part 1) When a finisher is installed, printed pages can be stapled. To use this feature, open the printer driver setup screen and select it in the "Finishing" field of the "Main" tab. ☞See Basic printing for details on how to open the printer driver. ● Note The maximum number of sheets that can be stapled is 30.
1 PRINTING FROM WINDOWS Stapling printed pages (when a finisher is installed) (part 2) When a saddle stitch finisher is installed When a saddle stitch finisher is installed, the binding edge and number of staples can be selected to produce the following printing results: Staple Left Right Top 1 Staple 2 Staples Punch function When a punch module is installed on a saddle stitch finisher, the "Punch" checkbox can be selected to punch holes in the printed output.
2 ADVANCED PRINTING (WINDOWS) Print hold function A print job sent to the machine can be held in the machine's memory until the operator initiates printing from the operation panel of the machine. This is called the Print Hold function. There are four methods for holding print jobs with the Print Hold function. Hold After Print Hold Before Print When this method is selected, the print job is printed and then retained in the machine's print hold job list.
2 ADVANCED PRINTING (WINDOWS) Printing using the print hold function (part 1) Selecting print hold settings in the printer driver at the time of printing Select the Print Hold function in the job control screen (see below), which is opened by clicking the "Job Control" button in the "Main" tab of the printer driver setup screen. ☞Basic printing 2 "Notify Job End" checkbox 1 2 3 1 "Retention" menu Select the Print Hold method that you wish to use.
2 ADVANCED PRINTING (WINDOWS) Printing using the print hold function (part 2) How to print a print hold job When you print a job using the Print Hold function, the job is stored in the print hold job list in the initial screen of printer mode. Follow the steps below to print the print hold job. 1 Press the [PRINT] key to switch to the initial screen of printer mode. 3 If you set a PIN number in the printer driver, press the numeric keys to enter the 5-digit number.
ADVANCED PRINTING (WINDOWS) 2 5 Printing using the print hold function Touch the [PRINT AND DELETE THE DATA] key or the [PRINT AND SAVE THE DATA] key. product_information.pdf CANCEL PRINT AND DELETE THE DATA PRINT AND SAVE THE DATA Note DELETE To delete the job after printing, touch the [PRINT AND DELETE THE DATA] key. To retain the job, touch the [PRINT AND SAVE THE DATA] key. 6 (part 3) Printing begins. If another print job is already in progress, the job is stored.
2 ADVANCED PRINTING (WINDOWS) Carbon copy print Carbon copy print is used to print copies of the same page on different types of paper. Each paper type is loaded in a different tray, and the different paper types must all be the same size. For example, carbon copy print can be performed with standard paper in tray 1 and colored paper in tray 2 for output as an invoice original and copy.
2 ADVANCED PRINTING (WINDOWS) Printing using carbon copy print To use the carbon copy print function, select the "Carbon Copy" checkbox in the "Paper" tab of the printer driver setup screen, and then click the "Carbon Copy Settings" button to configure print settings. 1 "Top Copy" menu Select the tray that will be used for the original. 2 "Carbon Copy" menu Select the tray or trays that will be used for the carbon copies. Be sure to select only trays that have the same size of paper as the "Top Copy".
ADVANCED PRINTING (WINDOWS) 2 Printing text and lines in black Color text and lines that are faint when printed normally can be printed in black to improve legibility. Printing text in black Printing lines in black Text that is any color other than white is printed in black. To use this function, open the printer driver setup screen and select the "Text To Black" checkbox in the "Advanced" tab. Lines and solids that are any color other than white are printed in black.
3 PRINTER UTILITIES (WINDOWS) Printer utilities The "Software" CD-ROM contains the following two printer utilities. Printer Status Monitor (for general users) Before using the Printer Status Monitor Note the following points before using the Printer Status Monitor. This allows the user to check on the computer screen whether or not the machine is able to print.
3 PRINTER UTILITIES (WINDOWS) Using the printer utilities (part 1) Starting up the printer utilities Using the printer utilities If the Printer Status Monitor or Printer Administration Utility is not running, use the following procedure to start the utilities. For information on using the Printer Status Monitor and Printer Administration Utility, see the Help files for each.
PRINTER UTILITIES (WINDOWS) 3 Using the printer utilities (part 2) Changing the Printer Status Monitor settings Once installed, the Printer Status Monitor normally runs in the background in Windows. If you need to change the Printer Status Monitor settings, follow the steps below. 1 Right-click the Printer Status Monitor icon ( ) on the task bar, and select "Preferences" from the pop-up menu. Note 2 Change the Printer Status Monitor settings as desired.
PRINTER UTILITIES (WINDOWS) 3 Using the printer utilities (part 3) Checking the printer status The Printer Status Monitor allows you to check whether or not toner and paper remain in the machine. 1 Right-click the Printer Status Monitor icon ( ) on the task bar, and select "SHARP AR-XXXX Status" from the pop-up menu. Note 2 The icon turns red when printing is not possible due to a machine error or other problem. Click the "Detail" button. To collapse the window, click the "Hide detail" button.
PRINTING FROM MACINTOSH 4 Basic printing (part 1) To use the machine as a printer for the Macintosh, the print server card (AR-NC5J) and the PS3 expansion kit must be installed and the machine must be connected to a network. To install the PPD file and configure the printer driver settings, see the software setup guide for network printer. Before printing, make sure that the correct size of paper for your document has been loaded in the machine.
PRINTING FROM MACINTOSH 4 5 Basic printing Configure print settings. Click next to "Copies & Pages" ("General" in Mac OS 8.6 to 9) and select the settings that you wish to configure from the pull-down menu. The corresponding setting screen will appear. Note 6 The settings vary depending on the operating system version, the printer driver version, and the application. Click the "Print" button . CONTENTS I N D E X (part 2) Printing begins.
4 PRINTING FROM MACINTOSH Basic printing (part 3) When "Paper Feed" is set to "Auto Select" If "Paper Feed" is set to "Auto Select" in the Print window and the correct size of paper is not loaded in the machine, the printing method will vary depending on the "FORCED OUTPUT OF PRINT" setting in the key operator programs (see the key operator's guide). Note In Mac OS 8.6 to 9.x, the "Paper Feed" setting is configured in "Paper Source" in the "General" menu of the Print window.
4 PRINTING FROM MACINTOSH Basic printing (part 4) When "Paper Feed" is set to paper tray or paper type If "Paper Feed" (or "Paper Source" in "General" in Mac OS 8.6 to 9.
4 PRINTING FROM MACINTOSH Job control function (Mac OS 8.6 to 9.x and Max OS X v10.2) Printing when auditing mode is enabled Using the print hold function When "AUDITING MODE" is enabled in the key operator programs, enter your 5-digit account number in "Account Number" in the "Job Control" menu of the Print window. The print hold function is enabled in "Job Control" in the Print window. Select the function that you wish to use in the "Retention" menu. ● Note In Mac OS 8.6 to 9.
OPERATION AT THE MACHINE 5 Giving priority to a print job / Canceling a print job (part 1) Giving priority to a print job When a print job is waiting because the machine is copying or printing a received fax, the following procedure can be used to interrupt the current job and immediately print the print job. Use the print job status screen to give priority to the job. For more information on using the job status screen, see operation manual for copier. 1 Press the [JOB STATUS] key.
OPERATION AT THE MACHINE 5 Giving priority to a print job / Canceling a print job (part 2) Canceling a print job A print job in progress or waiting to be printed can be canceled. Use the print job status screen to cancel the job. 1 Press the [JOB STATUS] key. 3 LINE DATA FAX JOB STATUS The job in progress and the jobs waiting to be printed appear. Touch the key of the job that you wish to cancel. The touched key is highlighted. CUSTOM SETTING 4 Touch the [STOP/DELETE] key.
OPERATION AT THE MACHINE 5 Configuring the printer condition settings (part 1) The printer condition settings allow basic printer settings to be configured. The following items can be set: ● DEFAULT SETTINGS: Basic settings used in printing. ● PostScript SETTINGS*: Sets whether a PostScript error ● PCL SETTINGS: PCL symbol set, font, line feed code, and page is printed or not when a PostScript error occurs. other settings. *Appears when the PS3 expansion kit is installed.
5 4 OPERATION AT THE MACHINE Configuring the printer condition settings Touch the desired setting on the setting screen of the desired item and touch the [OK] key. 5 (part 2) When finished, touch the [EXIT] key. EXIT CONDITION SETTINGS OK DEFAULT SETTINGS DEFAULT SETTINGS PCL SETTINGS 1/4 TONER SAVE COPIES 1 ORIENTATION P PostScript SETTINGS To set another item, repeat steps 3 and 4.
OPERATION AT THE MACHINE 5 Configuring the printer condition settings (part 3) Printer condition setting menu Click on a setting to view an explanation of the setting.
5 OPERATION AT THE MACHINE Configuring the printer condition settings (part 4) Printer condition settings Factory default settings are indicated in bold.
5 OPERATION AT THE MACHINE Configuring the printer condition settings Item SMOOTHING Selections Enabled, Disabled (no checkmark) RESOLUTION 300dpi, 600dpi, 1200dpi EXTRA PRINT MODE Enabled, Disabled (no checkmark) (part 5) Description This enables or disables smoothing. This function improves image quality by smoothing angles and curves in the image. When smoothing is enabled using a resolution of 600 dpi, an image quality equivalent to 1200 dpi can be obtained.
5 OPERATION AT THE MACHINE Configuring the printer condition settings Item 2-SIDE PRINT PAGE PROTECTION ROPM CONTENTS Selections 1-SIDED, 2-SIDED (Book), 2-SIDED (Tablet) Enabled (checkmark appears), Disabled Enabled, Disabled (no checkmark) I N D E X (part 6) Description When "2-SIDED (Book)" is selected, two-sided printing takes place so as to allow binding at the left side. When "2-SIDED (Tablet)" is selected, two-sided printing takes place so as to allow binding at the top.
5 OPERATION AT THE MACHINE Configuring the printer condition settings (part 7) PCL SETTINGS Item PCL SYMBOL SET SETTING Selections Description This specifies which country's characters (PCL symbol set) are assigned to certain of the symbols in the character code list. The factory default setting is "3" (PC-8). The numbers corresponding to each PCL symbol set can be viewed by printing "PCL SYMBOL SET LIST" in "LIST PRINT" in the custom settings.
5 OPERATION AT THE MACHINE Configuring the printer condition settings (part 8) PostScript SETTINGS "PostScript SETTINGS" only appears when the PS3 expansion kit is installed. Item PRINT PS ERRORS Selections Enabled, Disabled (no checkmark) CONTENTS I N D E X Description When this setting is enabled, an error description is printed each time a PostScript error occurs.
OPERATION AT THE MACHINE 5 Printing the printer setting and font lists To check the current printer condition settings or fonts that can be used, print the printer setting list or one of the font lists. 1 Press the [CUSTOM SETTINGS] key. LINE DATA B STATUS 2 S 3 Touch the list that you wish to print. Printing begins. TTINGS EST PAGE CUSTOM SETTINGS Touch the [LIST PRINT] key. Y T 4 LIST PRINT RECEIVE MODE Touch the [PRINTER TEST PAGE] key.
6 TROUBLESHOOTING Troubleshooting This chapter describes how to solve printer problems. Refer to the relevant section based on the problem. To load paper, remove paper misfeeds, load staples in the finisher, remove jammed staples, or replace the toner cartridge, see "TROUBLESHOOTING" in operation manual for copier.
6 TROUBLESHOOTING Printing does not take place (part 1) Check the connections USB or parallel connection in Windows Network connection ■ Is the interface cable compatible with the machine and computer? ■ Is the LAN cable disconnected? Interface cables compatible with this machine are USB and parallel cables. Check which type of cable is supported by your computer. For the specifications of the interface cable, see "CONNECTING TO A COMPUTER" in the software setup guide for network printer.
6 TROUBLESHOOTING Printing does not take place (part 2) Check Your Computer ■ Is there enough computer memory or hard disk space? To use the machine, your computer must have sufficient memory and hard disk space. If there is insufficient hard disk space, delete unnecessary files to increase the free space of the hard disk. If there is insufficient memory, close unnecessary applications to increase memory available for printing.
6 TROUBLESHOOTING Printing does not take place (part 3) Check the machine ■ Power switch on? ■ Copy job being performed? Turn the power switch on. (See "POWER ON AND OFF" in the operation manual for copier) ■ Is the machine online? When the ON LINE indicator next to the [PRINT] key on the operation panel is lit, the machine is online and ready to print. If the ON LINE indicator is off, press the [PRINT] key and then touch the [ONLINE] key. (When [ONLINE] is highlighted, the machine is online.
6 TROUBLESHOOTING Printing does not take place (part 4) Checking the printer driver ■ Is your machine selected correctly in the current application for the print job? Select the printer driver of the machine in the print settings window of the application. ● If the printer drivers appear as icons, click the icon of the machine. ● If the printer drivers are selected from a pull-down menu, select the printer driver of the machine from the menu.
6 TROUBLESHOOTING Improper printing operation Printing is slow ■ Simultaneous use of two or more application software programs? Start printing after quitting all unused application software programs. ■ Is an appropriate print quality selected in the printer driver? It takes longer to process the print data when "SMOOTHING" is enabled or the resolution is set to 1200 dpi, and this may slow the printing speed. Be sure to select print quality settings that are appropriate for the image being printed.
6 TROUBLESHOOTING Improper printing operation ■ Does the print job include page sizes that cannot be stapled? Stapling is not possible if the print job includes page sizes that cannot be stapled. ■ Is the paper tray that is selected in the printer driver set to a paper size or paper type that cannot be used for stapling? On the machine, set the paper tray to be used for staple printing to a paper size and paper type that can be used for stapling.
6 TROUBLESHOOTING Print quality is not satisfactory (part 1) Check the paper being used ■ Non-standard paper used? Check that the paper conforms to the specifications. Refer to "LOADING PAPER" in the operation manual for copier. ■ Are you using paper with a high moisture content? Use paper that is in good condition, with a low moisture content and no curling. ■ Is the paper loaded with the wrong side up? Some types of paper have a front and a back side.
6 TROUBLESHOOTING Print quality is not satisfactory (part 2) The printed image is coarse Part of the printed image is missing ■ Have the printer driver settings been specified to suit both paper and the print job? ■ Did you set sufficient margins in the paper settings of your application? The printing resolution can be set to 1200 dpi, 600 dpi, or 300 dpi. When 600 dpi or 300 dpi is selected, "SMOOTHING" can also be selected to improve the image quality.
6 TROUBLESHOOTING If a notice page is printed (part 1) If you find that a notice page has been printed at the end of a print job, the print data received from the computer has not been printed as specified. Fix the problem as explained below and then try printing again.
6 TROUBLESHOOTING If a notice page is printed Notice Page regarding memory full on the printer board **************************************************** Notice Page **************************************************** (part 2) Disabling notice page printing Notice page printing can be disabled using a key operator program (see "PROHIBIT NOTICE PAGE PRINTING" in the key operator's guide). The memory full error had occurred, a normal output was not able to be executed.
TROUBLESHOOTING 6 Removing the software In the event that you need to remove the printer driver or utilities, follow these steps: Windows 1 Macintosh (Mac OS 8.6 to 9.x) Click the "start" button, and then click "Control Panel". On Windows 95/98/Me/NT 4.0/2000, click the "Start" button, select "Settings", and then click "Control Panel". 2 Click "Add or Remove Programs". 3 Select the driver or utility that you wish to remove from the list, and click the appropriate button to remove it.
7 WEB PAGE IN THE MACHINE About the Web page (part 1) When the machine is connected to a network, you can access the machine's settings from your computer using a Web browser.
7 WEB PAGE IN THE MACHINE About the Web page (part 2) When you access the Web page in the machine, the following page will appear in your browser. A menu frame appears on the left side of the page. When you click an item in the menu, a screen appears in the right frame that allows you to establish settings for that item. For detailed explanations of the procedures for establishing settings, click [Help] in the menu frame.
7 WEB PAGE IN THE MACHINE E-mail print function (part 1) An e-mail account can be set up for the machine. When this is done, the machine will periodically check the e-mail server for e-mail and automatically print out any file attachments it receives. This provides a means for printing a file from a computer that does not have the printer driver installed, as the user can simply send the file to the machine as an e-mail attachment.
WEB PAGE IN THE MACHINE 7 E-mail print function (part 2) Using the E-mail print function To use the e-mail print function, attach the file that you wish to print to an e-mail message and send the e-mail to the machine's e-mail address. The machine can print the following file types: PCLXL, PCL5e, PS, PDF, and TIFF, with file extensions pcl, ps, pdf, tiff, and tif Control commands can be entered in the message of the e-mail to specify the number of copies and print format.
7 WEB PAGE IN THE MACHINE Directly printing a file in a computer A file that can be accessed by your computer can be directly printed without using the printer driver by specifying the file's address. Any file that can be accessed by your computer can be printed by this method, including not only files in your computer but files in other computers connected to the same network. To directly print a file by this method, click "Submit Print Job" in the menu frame of the Web page.
7 WEB PAGE IN THE MACHINE E-mail status and e-mail alert settings (part 1) These functions send information on machine use (print count, copy count, etc.) and error conditions (paper misfeed, out of paper, out of toner, etc.) via e-mail to the administrator of the machine or the dealer. Information setup SMTP setup Machine identification information for the status & alert E-mail function is configured in the "Information Setup" screen.
7 WEB PAGE IN THE MACHINE E-mail status and e-mail alert settings (part 2) Status message setup Use the status message function to send the current counter information, such as copy count, print count, and total output count, on a basis of the specified schedule. The destinations can be set for administrators and dealers respectively. To set up the status message, follow these steps: 1 In the link menu, click [Status Message].
7 WEB PAGE IN THE MACHINE E-mail status and e-mail alert settings (part 3) Alerts message setup Use the alert message function to send alert information, such as empty toner and trouble including paper misfeeds, to specified destinations when such problems occur. The destinations can be set for administrators and dealers respectively. To set up the alert message, follow the procedure shown below. 1 In the link menu, click [Alerts Message]. 2 Enter the destination addresses.
WEB PAGE IN THE MACHINE 7 Protecting information programmed in the web page ("Passwords") Passwords can be set to restrict Web page access and protect settings. Note that it is not necessary to set passwords; the network scanner function can also be used without passwords. A password can be set for the administrator and passwords can be set for each user.
SPECIFICATIONS 8 Printer specifications Printing speed AR-M236/AR-M237: 23 pages/min. at 600 dpi, 13.5 pages/min. at 1200 dpi*1 AR-M276/AR-M277: 27 pages/min. at 600 dpi, 13.5 pages/min.
9 INDEX Index Numerics "2-Up Pamphlet" ................................ 13 A (part 1) Checking the printer driver..................51 [CLEAR] key .......................................37 condition settings ................................38 Configuring the printer condition settings ...38 D About the Web page .......................... 59 Accessing the Web page ................... 59 ADVANCED PRINTING (WINDOWS) 20 Alerts message setup ........................ 66 Auditing mode Macintosh .............
9 INDEX Index (part 2) P R Pamphlet style ................................... 13 "Paper Selection" ................................. 7 "Paper Source" .................................... 8 "Paper Type"........................................ 8 Part of the printed image is missing... 55 Passwords ......................................... 67 PCL SETTINGS ................................. 44 "PIN" .................................................. 21 PIN (5-digit ID number) ......................
