Specifications

36
ADVANCED TRANSMISSION METHODS
9
Press the [START] key ( ).
The document is
scanned. If other
documents have
previously been stored,
the new document will be
added to the previous
documents.
If you used the document glass and have another
page to scan, change pages and then press the
[START] key ( ) again. Repeat this procedure until
all pages have been scanned, and then press the
[READ-END] key in the touch panel. "JOB STORED."
will appear briefly in the touch panel and then you will
return to the condition settings screen.
Printing documents in the Public Box
When documents are stored in the Public Box, an icon will appear to the right of the [PUBLIC BOX] key.
To check the stored data, you can print it out.
1
Touch the [SPECIAL MODES] key in
fax mode and then touch the
[MEMORY BOX] key.
If the address book
screen appears, touch
the [CONDITION
SETTINGS] key to
display the condition
settings screen. (p.7)
2
Touch the [PRINT DATA] key.
3
Touch the [PUBLIC BOX] key.
Touching the [CANCEL]
key will return you to the
screen of step 2.
4
Press the [START] key ( ).
"PRINT JOB IN
MEMORY. PLEASE
WAIT UNTIL PRINT
OUT." will appear and
the documents will be
printed.
To cancel scanning
To cancel scanning of a document while
scanning is in progress, press the [CLEAR]
key ( ). To erase the documents in the
Public Box, see "Deleting documents from
the Public Box" on page 37.
Note
PROGRAM
MEMORY BOX
POLLING
SLOW SCAN MODE
SUB ADDRESS
ADDRESS REVIEW
SPECIAL MODES
DIRECT TX MEMORY TX
POLLING MEMORY
E PRINT DATA
PUBLIC BOX