!!install_ar230270.
!!install_ar230270.book 2 ページ ２００３年７月１０日 木曜日 午後１１時１５分 INTRODUCTION This manual explains how to install and configure the software that is required for the printer function of the machine. The procedure for viewing the online manual is also explained. Note • The screen images in this manual are mainly for Windows® XP. With other versions of Windows®, some screen images may be different from those in this manual. • The explanations in this manual are based on the North American version of the software.
!!install_ar230270.book 1 ページ ２００３年７月１０日 木曜日 午後１１時１５分 CONTENTS SOFTWARE FOR THE SHARP AR-M230/M270 SERIES.................................................... 2 BEFORE INSTALLATION ..................................................................................................... 2 ● HARDWARE AND SOFTWARE REQUIREMENTS ................................................................... 2 ● INSTALLATION ENVIRONMENT AND INSTALLATION PROCEDURE.................................... 2 INSTALLING THE SOFTWARE .
!!install_ar230270.book 2 ページ ２００３年７月１０日 木曜日 午後１１時１５分 SOFTWARE FOR THE SHARP AR-M230/M270 SERIES The CD-ROM that accompanies the machine contains the following software: • Printer driver The printer driver enables you to use the printer function of the machine. • PC-FAX driver The PC-FAX driver lets you easily send faxes from your computer through the machine to another fax machine (when the facsimile expansion kit is installed). * To use the PC-FAX driver, Internet Explorer 4.
!!install_ar230270.book 3 ページ ２００３年７月１０日 木曜日 午後１１時１５分 INSTALLING THE SOFTWARE Note If an error message appears, follow the on-screen instructions to solve the problem. After the problem is solved, the installation procedure will continue. Depending on the problem, you may have to click the "Cancel" button to exit the installer. In this case, reinstall the software from the beginning after solving the problem.
!!install_ar230270.book 4 ページ ２００３年７月１０日 木曜日 午後１１時１５分 INSTALLING THE SOFTWARE 9 The files required for installation of the printer driver are copied (if "Printer Driver" was selected in Step 7). Follow the on-screen instructions. 10 When you are asked how the printer is connected, select "Connected to this computer" and click the "Next" button. Caution Begin the installation of the PC-FAX driver (if "PC-FAX Driver" was selected in Step 7). Follow the on-screen instructions.
!!install_ar230270.book 5 ページ ２００３年７月１０日 木曜日 午後１１時１５分 INSTALLING THE SOFTWARE 13 Begin installation of the printer driver. "SHARP AR-XXXX" will appear in the "Found New Hardware Wizard" dialog box. Select "Install the software automatically (Recommended)" and click the "Next" button. Follow the on-screen instructions. Caution If a warning window appears regarding the "Windows logo test", be sure to click the "Continue Anyway" button. This completes the installation of the software.
!!install_ar230270.book 6 ページ ２００３年７月１０日 木曜日 午後１１時１５分 INSTALLING THE SOFTWARE INSTALLATION IN WINDOWS 98/ME/2000 (USB CABLE) 1 The USB cable must not be connected to the machine. Make sure that the cable is not connected before proceeding. If the cable is connected, a Plug and Play window will appear. If this happens, click the "Cancel" button to close the window and disconnect the cable. Note The cable will be connected in step 12. 2 Insert the CD-ROM into your computer's CD-ROM drive.
!!install_ar230270.book 7 ページ ２００３年７月１０日 木曜日 午後１１時１５分 INSTALLING THE SOFTWARE When the interface selection screen appears, select "USB" and click the "Next" button. Click the "Finish" button when the message informs you that setup is successful. Caution In Windows 2000, if the following screen appears while the files are being copied (the message may appear more than once), click the "Yes" button. 11 When the "Finish" screen appears, click the "Close" button.
!!install_ar230270.book 8 ページ ２００３年７月１０日 木曜日 午後１１時１５分 INSTALLING THE SOFTWARE INSTALLATION IN WINDOWS 95/98/ME/NT4.0/2000 (PARALLEL CABLE) 1 The USB or parallel cable must not be connected to the machine. Make sure that the cable is not connected before proceeding. If the cable is connected, a Plug and Play window will appear. If this happens, click the "Cancel" button to close the window and disconnect the cable. Note The cable will be connected in step 18.
!!install_ar230270.book 9 ページ ２００３年７月１０日 木曜日 午後１１時１５分 INSTALLING THE SOFTWARE 11 12 When the interface selection screen appears, select "Parallel" and click the "Next" button. 15 When "The installation of the SHARP software is complete" appears, click the "OK" button. 16 Begin the installation of the PC-FAX driver (if "PC-FAX Driver" was selected in Step 7). Follow the on-screen instructions. • When the model selection window appears, select model name of your machine.
!!install_ar230270.book 10 ページ ２００３年７月１０日 木曜日 午後１１時１５分 CONNECTING TO A COMPUTER Follow the procedure below to connect the machine to your computer. Interface cables for connecting the machine to your computer are not included with the machine. Please purchase the appropriate cable for your computer. Interface cable USB cable Shielded twisted pair cable, high-speed transmission equivalent (9 feet (3 m) max.) If the machine will be connected using a USB 2.
!!install_ar230270.book 11 ページ ２００３年７月１０日 木曜日 午後１１時１５分 CONFIGURING THE PRINTER DRIVER After installing the printer driver, you must configure the printer driver settings appropriately for the number of paper trays on the machine and the size of paper loaded in each tray. 1 Click the "start" button, click "Control Panel", click "Printers and Other Hardware", and then click "Printers and Faxes".
!!install_ar230270.book 12 ページ ２００３年７月１０日 木曜日 午後１１時１５分 CONFIGURING THE PC-FAX DRIVER WHEN USING A USB CABLE (if the PC-FAX driver is installed) When the PC-FAX function is used with a USB cable, the port used by the PC-FAX driver must be configured. The PC-FAX driver uses the USB port that was created when the printer driver was installed. Configure the port after installing the printer driver (pages 3 to 9).
!!install_ar230270.book 13 ページ ２００３年７月１０日 木曜日 午後１１時１５分 HOW TO USE THE ONLINE MANUAL The online manual provides detailed instructions for operating the machine as a printer. View the online manual when you use the printer function after the initial setup is completed. Contents of the online manual The contents of the online manual are as follows. How to use the online manual: Explains how to use the online manual. Print: Provides information on how to print a document.
!!install_ar230270.book 14 ページ ２００３年７月１０日 木曜日 午後１１時１５分 TROUBLESHOOTING If the software does not install correctly, check the following items on your computer. To remove the software, see "Uninstalling the printer driver" in the online manual. Troubleshooting information can also be found in the README files for each of the software programs. To view a README file, click the "Display README" button in the "Select Packages" screen. (p.
!!install_ar230270.book 15 ページ ２００３年７月１０日 木曜日 午後１１時１５分 TROUBLESHOOTING The printer driver cannot be correctly installed by Plug and Play (Windows 2000/XP) In Windows 2000/XP, if the printer driver cannot be correctly installed by Plug and Play (for example, Plug and Play takes place without copying the required files for the printer driver installation), follow these steps to remove unneeded devices and then install the printer driver as explained in "INSTALLING THE SOFTWARE" (p. 3).
!!install_ar230270.
