Service manual

AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 11
<Desk>
<LCC>
Operation/Procedure
1. Select the number corresponding to the target of operation
check with 10-key.
2. Press [START] key.
The load selected in procedure 1 is operated.
Press [CUSTOM SETTINGS] key to stop the operation of the
load.
<Desk>
<LCC>
DDRS Desk door sensor
DSPD2 Desk cassette 2 remaining paper quantity sensor
DSPD1 Desk cassette 1 remaining paper quantity sensor
DCSS24 Desk cassette 2 paper rear edge sensor 4
DCSS23 Desk cassette 2 paper rear edge sensor 3
DCSS22 Desk cassette 2 paper rear edge sensor 2
DCSS21 Desk cassette 2 paper rear edge sensor 1
DLUD2 Desk cassette 2 upper limit sensor
DPED2 Desk cassette 2 paper sensor
DPFD3 Desk paper transport sensor 3
DCSS14 Desk cassette 1 paper rear edge sensor 4
DCSS13 Desk cassette 1 paper rear edge sensor 3
DCSS12 Desk cassette 1 paper rear edge sensor 2
DCSS11 Desk cassette 1 paper rear edge sensor 1
DLUD1 Desk cassette 1 upper limit sensor
DPED1 Desk cassette 1 paper sensor
DPFD2 Desk paper transport sensor 2
MCSS4 MP tray size detection 4
MCSS3 MP tray size detection 3
MCSS2 MP tray size detection 2
MCSS1 MP tray size detection 1
MCSPD MP tray remaining quantity detection
MCLUD MP tray upper limit detection
MCPED MP tray paper empty detection
DPFD1 MP tray transport detection
TDRS Tandem side door sensor
TTSD Tandem tray sensor
TLUD2 Tandem tray 2 upper limit sensor
TLUD1 Tandem tray 1 upper limit sensor
TSPD2 Tandem tray 2 remaining quantity sensor
TSPD1 Tandem tray 1 remaining quantity sensor
TPED2 Tandem tray 2 paper sensor
TPED1 Tandem tray 1 paper sensors
TPFD3 Tandem paper transport sensor 3
TPFD2 Tandem paper transport sensor 2
MCSS4 MP tray size detection 4
MCSS3 MP tray size detection 3
MCSS2 MP tray size detection 23
MCSS1 MP tray size detection 1
MCSPD MP tray remaining quantity detection
MCLUD MP tray upper limit detection
MCPED MP tray paper empty detection
TPFD1 MP tray transport detection
SIMULATION 4-2
DESK SENSOR CHECK.
DDRS DPFD1 DPFD2 DPFD3
MCLUD DLUD1 DLUD2 MCSPD
DSPD1 DSPD2 MCPED DPED1
DPED2 MCSS1 MCSS2 MCSS3
MCSS4 DCSS11 DCSS12 DCSS13
DCSS14 DCSS21 DCSS22
DCSS23 DCSS24
SIMULATION 4-2
LCC SENSOR CHECK.
TDRS TTSD TPFD1 TPFD2
TPFD3 MCLUD TLUD1 TLUD2
MCSPD TSPD1 TSPD2 MCPED
TPED1 TPED2 MCSS1 MCSS2
MCSS3 MCSS4
4-3
Purpose Operation test/Check
Function
(Purpose)
Used to check the operations of the loads in the
paper feed section (desk paper feed/large
capacity tray) and the related circuit.
Section Paper feed
Item Operation
1 DLUM2 Desk lift-up motor 2
2 DLUM1 Desk lift-up motor 1
3 MCLUM Desk multi lift-up motor
4 DPFCL Desk paper transport clutch
5 DPCL2 Desk paper feed clutch 2
6 DPCL1 Desk paper feed clutch 1
7 MCPCL Desk multi paper feed clutch
8 DMM Desk transport motor
1 TLUM2 LCC lift-up motor 2
2 TLUM1 LCC lift-up motor 1
3 MCLUM LCC multi lift-up motor
4 TPFCL LCC transport clutch
5 TPCL2 LCC paper feed clutch 2
6 TPCL1 LCC paper feed clutch 1
7 MCPCL LCC multi paper feed clutch
8 TMM LCC transport motor
Press [START] key, and the operation
is started.
Press [CUSTOM SETTINGS] key, and
the operation is stopped.
SIMULATION 4-3
LCC LOAD TEST. SELECT 1- , AND PRESS START.
1.
2
SIMULATION 4-3
LCC LOAD TEST. EXECUTING
...
.
1.
2