Service manual

AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 18
Operation/Procedure
1) Select 1 (YES) with 10-key.
2) Press [START] key. (The trouble display is canceled.)
Operation/Procedure
1) Enter the number corresponding to the maintenance timing
display.
2) Press [START] key. The condition entered in procedure 1) is
set.
Operation/Procedure
Various print counter values are displayed.
Operation/Procedure
The paper jam/trouble counter value is displayed.
17
17-0
Purpose Clear/Cancel (Trouble etc.)
Function
(Purpose)
Used to cancel the PF troubles (when the copy
inhibit command from the host computer is
received).
Section Communication unit (TEL/LIU/MODEM etc.)
Item Trouble Error
1 YES After canceling the PF trouble, the machine returns
to the main code entry standby mode.
2 NO Without canceling the trouble, the machine returns
to the main code entry standby mode.
21
21-1
Purpose Setting
Function
(Purpose)
Used to set the maintenance cycle.
Item Specifications Counter
Maintenance timing display Set range
0 Default (Differs depending on the model.) 0 - 999
1 - 200 Maintenance display at 1K - 200K
999 No maintenance display
SIMULATION 17
PF TROUBLE CANCELLATION.
ARE YOU SURE?
1. YES
2. NO
1
SIMULATION 21-1
MAINTENANCE CYCLE SETUP. INPUT VALUE 0-999, AND PRESS
START.
0: DEFAULT
1-200: MAINTENANCE CYCLE (1K-200K)
999: FREE
0
22
22-1
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function
(Purpose)
Used to check the print count value in each
section and each operation mode. (Used to check
the maintenance timing.)
Item Counter
TOTAL Total counter
DRUM Drum counter
TONER Toner counter
DEVE Developer counter
MAINTENANCE Maintenance counter
TOTAL OUTPUT Total output quantity
COPIES Copy effective paper counter
PRINTER Printer counter
FAX FAX print counter
I-FAX OUTPUT iFAX print counter
DOC FILING OUTPUT Document filing print counter
RIIGHT SIDE OUTPUT Right paper exit counter
OTHERS Other print counter (List print , etc.)
22-2
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function
(Purpose)
Used to check the total numbers of misfeed and
troubles. (When the number of misfeed is
considerably great, it is judged as necessary for
repair. The misfeed rate is obtained by dividing
this count value with the total counter value.)
Item Trouble
PAPER JAM Number of paper jams
SPF JAM Number of SPF jams
TROUBLE Number of troubles
SIMULATION 22-1
COUNTER DATA DISPLAY.
TOTAL: ******** DRUM: ******** TONER: ********
DEVE: ******** MAINTENANCE: ********
TOTAL OUTPUT: ******** COPIES: ********
PRINTER: ******** FAX OUTPUT: ********
I-FAX OUTPUT:******** DOC FILING OUTPUT:********
RIGHT SIDE:******** OTHERS: ********
SIMULATION 22-2
JAM/TROUBLE COUNTER DATA DISPLAY.
PAPER JAM: ******** SPF JAM: ********
TROUBLE: ********