Service manual

AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 20
(10 lines, 80 digits = 800 characters)
Operation/Procedure
The trouble history is displayed.
The trouble history is displayed sequentially from the latest one.
The max. 100 items can be stored. (The oldest one is deleted
sequentially. The trouble position can be identified by the data.)
(10 lines, 80 digits = 800 characters)
Operation/Procedure
The ROM version of each section can be checked. When there is
any problem in the software, use this simulation to check the ROM
version of each section and revise the version if necessary.
Operation/Procedure
When installing or servicing this machine, execute this simulation
to print and save various setting and adjustment data for next ser-
vicing. (For example, memory trouble, PWB replacement, etc.)
1) Enter 1 with 10-key.
2) Press [START] key.
The various setting and adjustment data are printed out. (The print
paper cannot be selected optionally.)
FSCPD_N Built-in finisher SCPD not-reaching jam
FSCPD_S Built-in finisher SCPD remaining jam
FPOD_N Built-in finisher POD not-reaching jam
FPOD_S Built-in finisher POD remaining jam
FES_N Console finisher entry port sensor (FES)
not-reaching jam
FES_S Console finisher entry port sensor (FES)
remaining jam
FFPS_N Console finisher saddle not-reaching jam
(Not reaching the folding sensor (FFPS).)
FFPS_S Console finisher saddle remaining jam
(The folding sensor (FFPS) does not turn
off.)
FSTPL Console finisher staple jam
(The stapler does not complete clinching.)
FPNCH Console finisher punch jam
(The puncher does not complete punching.)
FDOP Console finisher door open jam
(During/after paper passing, the front door,
joint, or upper cover is opened.)
PID_N Mail box PID not-reaching jam
PID_S Mail box PID remaining jam
MPPD1_N Mail box MPPD1 not-reaching jam
MPPD1_S Mail box MPPD1 remaining jam
MPPD2_N Mail box MPPD2 not-reaching jam
MPPD2_S Mail box MPPD2 remaining jam
MPPD3_N Mail box MPPD3 not-reaching jam
MPPD3_S Mail box MPPD3 remaining jam
MPPD4_N Mail box MPPD4 not-reaching jam
MPPD4_S Mail box MPPD4 remaining jam
MPPD5_N Mail box MPPD5 not-reaching jam
MPPD5_S Mail box MPPD5 remaining jam
22-4
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function
(Purpose)
Used to check the trouble (self diag) history.
Item Trouble
Code Description
SIMULATION 22-3
PAPER JAM HISTORY.
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
···············
SIMULATION 22-4
TROUBLE HISTORY.
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
···············
22-5
Purpose Other
Function
(Purpose)
Used to check the ROM version of each unit
(section).
Item Software
S/N Engine section serial number
MFP MFP controller
(LANGUAGE) (Language version)
BOOT MFP controller boot ROM
FAX FAX controller
NIC Network card
PCU PCU controller
SCANNER Scanner controller
FINISHER Finisher controller
DESK Desk/LCC controller
MAIL BIN mail bin controller
PUNCH UNIT Punch unit
22-6
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function
(Purpose)
Used to output the list of the setting and
adjustment data (simulations, FAX soft switch,
counters).
Item Data Adjust/Setting data
0 TRAY SELECT TRAY SELECT auto only (Selection is
not allowed.)
1 PRINT START PRINT START
Select 1 and press
[START] key.
Press [CUSTOMSETTING] key or
[START] key.
SIMULATION 22-5
ROM VERSION DATA DISPLAY.
S/N: 0000000000
MFP: 1.00 (LANGUAGE:1.00)
PCU: 1.00 BOOT: 1.00
SCANNER: 1.00 FAX: 1.00
FINISHER: 1.00 NIC: 1.00
DESK: 1.00 MAIL BIN: 1.00
PUNCH UNIT: 1.00
SIMULATION 22-6
DATA PRINT MODE. SELECT SETTING, AND PRESS START.
0. TRAY SELECT :AUTO ONLY
1. PRINT START
1
SIMULATION 22-6
0
DATA PRINT MODE. EXECUTING···.
0. TRAY SELECT :1