Service manual

AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 22
Operation/Procedure
The values of the FAX send counter and the FAX receive counter
are displayed.
Operation/Procedure
The history of paper jam and misfeed is displayed.
The misfeed history is displayed sequentially from the latest one.
The max. 20 items are recorded. (The oldest one is sequentially
deleted.) This data can be used to identify the trouble position.
The latest 20 data of document jam history are displayed. (Refer
to the jam code below.)
(Jam cause code)
(10 lines, 80 digits = 800 characters)
Operation/Procedure
The rotating time and the print quantity of the process section
(OPC drum, DV unit (developer), toner motor (toner bottle)) are
displayed.
Punch unit ---- Punch unit not installed
AR-PN1A Punch unit 2 holes
AR-PN1B Punch unit 3 holes
AR-PN1C Punch unit 4 holes
AR-PN1D Punch unit 4 holes wide hole
ADU ---- Duplex module not installed
AR-DU3 Duplex module installed
AR-DU4 Duplex module + manual feed unit
installed
DESK ---- Paper feed desk not installed
AR-MU2 Multi-purpose tray installed
AR-D27 Paper feed desk installed
AR-D28 Tandem desk installed
ICU TYPE-U/S For U/S model board
TYPE-U/FP For U/FP model board
TYPE-N For N model board
MEMORY 0MB No expansion memory
***MB Expansion memory ***MB
HD 0MB Hard disk not installed
****MB Hard disk installed (AR-HD3)
NIC ---- NIC not installed
AR-NC7J NIC installed
PS3
expansion kit
---- PS3 expansion kit not installed
AR-PK6 PS3 expansion kit installed
FAX ---- FAX expansion kit not installed
AR-FX12 FAX expansion kit installed
Network
scanner
---- Network expansion kit not installed
AR-NS3 Network expansion kit installed
Expansion
memory
---- Expansion memory for FAX not
installed
AR-MM9 Expansion memory for FAX 8MB
(AR-MM9) installed
Handset ---- handset not installed
AR-HN5 Handset installed
Finish stamp ---- Finish stamp unit not installed
AR-SU1 Finish stamp unit installed
22-11
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function
(Purpose)
Used to check the use frequency (send/receive) of
FAX. (Only when FAX is installed)
Section FAX
Item Data
FAX SEND Number of FAX send
FAX RECEIVE Number of FAX receive
FAX OUTPUT Number of FAX print
SEND IMAGES Send quantity
SEND TIME Send time
RECEIVE TIME Receive time
Item Display Content
SIMULATION 22-10
SYSTEM INFORMATION.
MACHINE:*******
SPF:*******
FINISHER:******* MAIL BIN:******* PUNCH:******
DESK/LCC:******* ADU:*******
SYSTEM MEMORY:**MB HDD:***MB ICU:******
NIC:******* NSCN:****** PS3:******
FAX:******* FAX MEMORY:**MB HAND SET:*******
STAMP:*******
PCU TYPE:*******
22-12
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function
(Purpose)
Used to check the SPF misfeed positions and the
number of misfeed at each position. (When the
number of misfeed is considerably great, it can be
judged as necessary for repair.)
Section DSPF
Item Trouble
Code Description
NO_JAM_CAUSE No jam. Also used to cancel a jam.
SPPD_N SPPD not-reached jam
SPPD_S SPPD remaining jam
STD_N STD not-reached jam
STD_S STD remaining jam
SPOD_N SPOD not-reached jam
SPOD_S SPOD remaining jam
SPSDSCN Exposure start timer end
22-13
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function
(Purpose)
Used to check the operating time of the process
section (OPC drum, DV unit, toner bottle).
Item Counter
DRUM OPC drum Count value (counts)
Rotating time (sec)
TONER Toner motor Count value (counts)
Rotating time (sec)
DEVE DV unit Count value (counts)
Rotating time (sec)
SIMULATION 22-11
FAX COUNTER DATA DISPLAY.
FAX SEND: ******** FAX RECEIVE : ********
FAX OUTPUT:********
SEND IMAGES: ******** SEND TIME: ********:**:**
RECEIVE TIME: ********:**:**
SIMULATION 22-12
SPF JAM HISTORY.
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******