Service manual

AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 24
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
* = PAPER JAM, SPF JAM, TROUBLE
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
* = TRAY1, TRAY2, TRAY3/LCC1, TRAY4/LCC2, BPT,
ADU
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
* = SPF, SCAN, STAPLER, PUNCH, STAMP
24
24-1
Purpose Data clear
Function
(Purpose)
Used to clear the misfeed counter, the misfeed
history, the trouble counter, and the trouble
history. (The counters are cleared after completion
of maintenance.)
Item Counter
1 PAPER JAM Number of paper jams
2 SPF JAM Number of SPF jams
3 TROUBLE Number of troubles
Press [START] key. Press [CUSTOM SETTINGS] key or [START] key.
24-2
Purpose Data clear
Function
(Purpose)
Used to clear the number of use (the number of
prints) of each paper feed section.
Section Paper feed
Item Counter
1 TRAY1 Tray 1 use quantity
2 TRAY2 Tray 2 use quantity
3 TRAY3/LCC1 Tray 3/LCC left tray use quantity
4 TRAY4/LCC2 Tray 4/LCC right tray use quantity
5 BPT Manual feed tray use quantity
6 ADU Duplex feed quantity
SIMULATION 24-1
JAM/ TROUBLE COUNTER DATA CLEAR. SELECT1-3, AND
PRESS START.
1. PAPER JAM
2. SPF JAM
3. TROUBLE
1
SIMULATION 24-1
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
Press [START] key. Press [CUSTOM SETTINGS] key or [START] key.
24-3
Purpose Data clear
Function
(Purpose)
Used to clear the number of use of the finisher,
SPF, and the scan (reading) unit.
Section
Item Counter
1 SPF SPF paper pass quantity
2 SCAN Number of times of document scan
3 STAPLER Number of times of stapling
4 PUNCH Number of times of punching
5 STAMP Number of times of SPF finish stamp
Press [START] key. Press [CUSTOM SETTINGS] key or
[START] key.
1
SIMULATION 24-2
PAPER FEED COUNTER DATA CLEAR. SELECT1-6, AND PRESS
START.
1. TRAY1 2. TRAY2
3. TRAY3/LCC1 4. TRAY4/LCC2
5. BPT 6. ADU
SIMULATION 24-2
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
SIMULATION 24-3
ORG./STAPLE COUNTER DATA CLEAR. SELECT 1-5, AND PRESS
START.
1. SPF
2. SCAN
3. STAPLER
4. PUNCH
5. STAMP
1
SIMULATION 24-3
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1