Service manual

AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 31
Operation/Procedure
1) Enter the tag number with 10-key.
2) Press [START] key.
Operation/Procedure
The operating conditions of sensors and detectors are displayed.
The active sensors and detectors are highlighted.
Operation/Procedure
The operating conditions of sensors and detectors are displayed.
The active sensors and detectors are highlighted.
Operation/Procedure
The operating conditions of sensors and detectors are displayed.
The active sensors and detectors are highlighted.
The paper width size detection level is displayed.
27-5
Purpose Setting
Function
(Purpose)
Used to enter the machine tag No. (This function
allows to check the tag No. of the machine with the
host computer.)
Section Communication unit (TEL/LIU/MODEM etc.)
Item Specifications Operation mode
30
30-1
Purpose Operation test/Check
Function
(Purpose)
Used to check the operation of sensors and
detectors in other than the paper feed section and
the operations of the related circuits.
Item Operation
PPD1 Resist roller front paper detection
POD1 After-fusing transport detection 1
POD2 After-fusing transport detection 2
POD3 Paper full detection
DSWL Cabinet open detection
DSWF Front door
30-2
Purpose Operation test/Check
Function
(Purpose)
Used to check the operation of sensors and
detectors in the paper feed section and the related
circuits.
Section Paper feed
Item Operation
SIMULATION 27-5
TAG # SETTING. INPUT VALUE, AND PRESS START.
PRESENT: 00010000
NEW: 00009999
SIMULATION 30-1
SENSOR CHECK..
PPD1 POD1 POD2 POD3 DSWL
DSWF
CSS1 Tray 1 insertion detection
PED Tray 1 paper empty detection
LUD Tray 1 upper limit detection
MCSET MP unit detection
MCDRS MP unit side door open detection
MCPPD MP tray transport detection
MCLUD MP tray upper limit detection
MCPED MP tray paper empty detection
MCSPD MP tray remaining quantity detection
MCSS1 MP tray size detection 1
MCSS2 MP tray size detection 2
MCSS3 MP tray size detection 3
MCSS4 MP tray size detection 4
MP Tray size (The detection size of MP tray is displayed.)
MPFSET Manual feed tray detection
MPED Manual feed tray paper empty detection
MPLD Manual feed length detection
MPLS1 Manual feed pull-out sensor 1
MPLS2 Manual feed pull-out sensor 2
Bypass Tray size (The detection size of manual feed tray is
displayed.)
40
40-1
Purpose Operation test/Check
Function
(Purpose)
Used to check the operation of the manual feed
tray paper size detector and the related circuit.
(The operation of the manual feed tray paper size
detector can be monitored with the LCD display.)
Section Paper feed
Item Operation
MPLD Manual tray length detection
MPLS1 Manual tray pull-out detection 1
MPLS2 Manual tray pull-out detection 2
BYPASS_WIDTH Manual feed guide plate position
BYPASS_AD Manual feed width detection volume
output AD value
Bypass Tray width
size
(Manual tray detection size is displayed.)
A4/A3, 11 x, B5/B4, 8.5 x , A4R, B5R,
A5R, 5.5x, 7.25x, EXTRA
SIMULATION 30-2
TRAY SENSOR CHECK..
CSS PED LUD
MCSET MCDRS MCPPD MCLUD MCPED MCSPD MCSS1 MCSS2
MCSS3 MCSS4 (MP Tray size: A4 )
MPFSET MPED MPLD MPLS1 MPLS2
(Bypass Tray size: A3 )
SIMULATION 40-1
BYPASS TRAY SENSOR CHECK..
MPLD MPLS1 MPLS2
BYPASS_WIDTH: 2100 BYPASS_AD: 600
(Bypass Tray width size: A4/A3)