Service manual

AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 65
Operation/Procedure
This simulation is used to change and check the controller soft
SW. Set this setting to the default.
There is no need to change this setting in the market.
Operation/Procedure
1) Select the number corresponding to the data transfer mode
with 10-key.
*: When Flash ROM or OP_Flash ROM is not installed, transfer
is not made.
2) Press [START] key.
3) The confirmation menu is opened to confirm YES/NO of data
transfer. Select one.
4) Press [START] key.
After completion of transfer, the transfer result is displayed.
If there is no error, the machine is automatically reset after com-
pletion of data transfer.
If there is an error, "NG" is displayed. (The machine is not reset.)
When restoring from HDD, fit the configurations of the Flash ROM
and the optional Flash ROM at back-up.
Operation/Procedure
1) Enter the number corresponding to the memory to be checked
with 10-key.
2) Press [START] key.
The memory read/write operation is started.
After starting the operation, "NOW CHECKING" is displayed dur-
ing checking. When read/write is normally completed, "OK" is dis-
played. If an error occurs, "NG" is displayed.
55-3
Purpose Setting
Function
(Purpose)
Used to set the specifications of the controller
operations. (MFP control PWB)
Section
Item Operation Specifications
Press [START] key. Press [CUSTOM SETTINGS] key or [START] key.
56
56-1
Purpose Data transfer
Function
(Purpose)
Used to transfer the MFP controller data. (Used to
repair the PWB.)
Section MFP controller
Item Data transfer
1 ALL (EEPROM, SRAM,
FlashROM) → HDD
All the contents of memory are
transferred to HDD. (Similar to
execution of items 3 and 5.)
2 HDD → ALL
(EEPROM, SRAM,
FlashROM)
The HDD contents are transferred
to all the memories. (Similar to
execution of items 4 and 6.)
3EEPROM → HDD Transfer from EEPROM to HDD
4 HDD → EEPROM Transfer from HDD to EEPROM
5 SRAM (+ FAX Memory,
+ Option Memory) →
HDD
Transfer from SRAM to HDD.
When, however, the FAX memory
or an option memory (for FAX
memory) * is installed, the
contents of the Fax memory are
also transferred to HDD.
6 HDD → SRAM (+ FAX
Memory, + Option →
Memory)
Transfer from HDD to SRAM.
When, however, the FAX memory
or an option memory (for FAX
memory) * is installed, the
contents HDD are transferred to
the FAX memory as well as the
SRAM.
7 FontROM → HDD Transfer from the font ROM to
HDD
1
SIMULATION 55-3
MFP SOFT SW. SETTING. SELECT 1-16, AND PRESS START.
12345678
00001001
SIMULATION 55-3
MFP SOFT SW. SETTING. INPUT DATA No(1-8), AND PRESS
START.
SOFT SW-1:
1 YES Data transfer is executed.
2 NO Data transfer is not executed.
Press [START] key. Press [CUSTOM SETTINGS] key or [START] key.
Select 1 and press [START] key.
60
60-1
Purpose Operation test/Check
Function
(Purpose)
Used to check the MFP control (DRAM)
operations (read/write).
Section ICU
Item Operation
1 MFP DRAM ERDH image memory
2 ASIC DRAM ASIC image memory
1
SIMULATION 56-1
DATA COPY. SELECT 1-7, AND PRESS START.
1.ALL(EEPROM,SRAM,FlashROM) → HDD
2.HDD → ALL(EEPROM,SRAM,FlashROM)
3.EEPROM → HDD
4.HDD → EEPROM
5.SRAM(+FAX Memory,+Option Memory) → HDD
6.HDD → SRAM(+FAX Memory,+Option Memory)
7.FontROM → HDD
1
SIMULATION 56-1
EEPROM → HDD DATA COPY.
ARE YOU SURE?.
1. YES
2. NO
SIMULATION 56-1
EEPROM → HDD DATA COPY.
COMPLETE (or NG)