Service manual

AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 76
Operation/Procedure
The paper is automatically selected with the size saved in the
image memory.
Operation/Procedure
All image data stored in the image memory are printed.
∗ The confidential receive data are also printed.
The paper is automatically selected with the size saved in the
image memory.
Operation/Procedure
1) Enter the number corresponding to the output mode with 10-
key.
2) Press [START] key.
The output is delivered at the max. level.
When the number is entered during execution, the kind of signal
can be changed.
When [START] key is pressed, the voice message is sent. When
[CUSTOM SETTINGS] key is pressed, it is stopped.
66-6
Purpose User data output/Check (Display/Print)
Function
(Purpose)
Used to print the confidential pass code. (Used
when the confidential pass code is forgotten.)
(Only when FAX is installed)
Section FAX
Item Data
1 PRINT START Print start
66-7
Purpose User data output/Check (Display/Print)
Function
(Purpose)
Used to print the image memory data (memory
send/receive). (Only when FAX is installed)
Section FAX
Item Data
1 PRINT START Print start
(When 1)
SIMULATION 66-6
PASS CODE PRINT OUT. EXECUTING···.
1.PRINT START
SIMULATION 66-6
PASS CODE PRINT OUT. PRESS START.
1.PRINT START
When there is no print data,
the display returns to the
original state without printing.
Press [START] key.
After completion of printing
SIMULATION 66-7
IMAGE MEMORY PRINT OUT. PRESS START.
1.PRINT START
(When 1)
SIMULATION 66-7
IMAGE MEMORY PRINT OUT. EXECUTING···.
1.PRINT START
Press [START] key.
After completion of printing
66-8
Purpose Operation test/Check
Function
(Purpose)
Used to check the output operation of various
sound signals of FAX. (Used to check the
operation of the sound output IC.) Send level:
Max. (Only when FAX is installed)
Section FAX
Item Operation
1 NONE Mute 11 MESSAGE 9 Message 9
2 PAUSE Pause sound 12 MESSAGE 10 Message 10
3 MESSAGE1 Message 1 13 MESSAGE 11 Message 11
4 MESSAGE2 Message 2 14 MESSAGE 12 Message 12
5 MESSAGE3 Message 3 15 MESSAGE 13 Message 13
6 MESSAGE4 Message 4 16 MESSAGE 14 Message 14
7 MESSAGE5 Message 5 17 MESSAGE 15 Message 15
8 MESSAGE6 Message 6 18 ALARM Alarm
9 MESSAGE7 Message 7 19 RINGER Call ring
10 MESSAGE8 Message 8 20 EXT.TEL.RINGER
External TEL ring
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS
START.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.ALARM
19.RINGER 20.EXT.TEL.RINGER
2
Same
display
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS
START. EXECUTING···.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.ALARM
19.RINGER 20.EXT.TEL.RINGER
2
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS
START. EXECUTING···.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.ALARM
19.RINGER 20.EXT.TEL.RINGER
1
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS
START.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.ALARM
19.RINGER 20.EXT.TEL.RINGER
2
Press [CUSTOM SETTINGS] key.
Press [CUSTOM SETTINGS] key.
Select 2, and press [START] key.
Select other 1, and press [START] key.