Service manual

AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 79
(Dial pulse make time setting)
1) Enter 1 with 10-key.
2) Press [START] key.
3) Enter the set value with 10-key.
4) Press [START] key.
The dial signal is sent with the set value + 29ms.
When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.
Operation/Procedure
1) Enter 0 with 10-key.
2) Press [START] key.
The dial signal is outputted.
(Dial pulse make time setting)
1) Enter 1 with 10-key.
2) Press [START] key.
3) Enter the set value with 10-key.
4) Press [START] key.
The dial signal is sent with the set value + 9ms.
When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.
Operation/Procedure
1) Enter 0 with 10-key.
2) Press [START] key.
The dial signal is outputted.
(Dial pulse make time setting)
1) Enter 1 or 2 with 10-key.
2) Press [START] key.
3) Enter the set value with 10-key.
4) Press [START] key.
When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.
0 EXECUTE Execute
1 MAKE TIME Dial pulse make time setting (0 - 15)
66-15
Purpose Setting/Operation test/Check
Function
(Purpose)
Used to set the make time in the FAX pulse dial
mode (20pps) and to test the dial signal output.
(The dial number signal set by SIM 66-13 is
outputted.) Used to check troubles in dialing and
to check the operation. (Only when FAX is
installed)
Section FAX
Item Operation
0 EXECUTE Execute
1 MAKE TIME Dial pulse make time setting (0 - 15)
SIMULATION 66-14
DIAL TEST(10PPS). SELECT 0-15, AND PRESS START.
[1. MAKE TIME]
1
7
SIMULATION 66-14
DIAL TEST(10PPS). EXECUTE
1. MAKE TIME 7 ; [+29 ms]
SIMULATION 66-14
DIAL TEST(10PPS). SELECT 0-1, AND PRESS START.
0. EXECUTE
1. MAKE TIME 7 ; [+29 ms]
Press [CUSTOM SETTINGS] key.
Press [CUSTOM SETTINGS] key
or press [START] key.
Select 1 and
press [START] key.
Select 0
and press
[START] key.
66-16
Purpose Setting/Operation test/Check
Function
(Purpose)
Used to check the dial signal (DTMF) output in the
FAX tone dial mode. (The dial number signal set
by SIM 66-13 is outputted.) The send level can be
set to an optional level. Used to check troubles in
dialing and to check the operation. (Only when
FAX is installed)
Section FAX
Item Operation
Item Set range
0 EXECUTE Execution
1 HIGH High group level 0 - 15dB
2 HIGH LOW High group - Low group 0 - 15
SIMULATION 66-15
DIAL TEST(20PPS). SELECT 0-1, AND PRESS START.
0. EXECUTE
1. MAKE TIME 7 ; [+9 ms]
SIMULATION 66-15
DIAL TEST(20PPS). SELECT 0-15, AND PRESS START.
[1. MAKE TIME]
1
7
SIMULATION 66-15
DIAL TEST(20PPS). EXECUTING···.
1. MAKE TIME 7 ; [+9 ms]
Press [CUSTOM SETTINGS] key.
Press [CUSTOM SETTINGS] key
or press [START] key.
Select 1 and
press [START] key.
Select 0
and press
[START] key.