Service manual

AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 85
Operation/Procedure
To execute this simulation, FAX program writing must be allowed.
(Jumpers and DIP SW depending on the model.) The adjustment
values in PIC are changed or rewritten.
1) Enter the number corresponding to the set item with 10-key.
2) Press [START] key.
3) Enter the set value.
4) Press [P] key.
5) Select 0.
6) The confirmation window is displayed. Select whether the PIC
adjustment values are written or not.
When writing of the PIC adjustment values is normally completed,
“OK” is displayed. In case of an error, “NG” is displayed.
66-43
Purpose Setting
Function
(Purpose)
PIC adjustment value writing (Only when FAX is
installed)
Section FAX
Item Operation
YES The adjustment values are collectively written into PIC
installed in the FAX BOX.
NO No writing
Item Content Set range Default
0 WRITING for PIC Writing to PIC ––
1 ci_level_judge Number of sensing
until the CI signal
level is setteld.
1-15 2
2 ci_cycle_min CI signal cycle
min. Time
0-254 10
3 ci_cycle_max CI signal cycle
max. time
0-254 107
4 ci_range CI signal allowable
range
0-127 5
5 ci_count CI signal
settlement number
of times
1-15 3
6 ci_detect CID IN- signal
settlement number
of times
1-15 8
7 fnet_level_judge Sense number of
times until
settlement of
FNET signal level
1-15 1
8 fnet_range FNET signal
allowable range
0-74 3
9 fnet_time_out FNET time out
time
76-255 100
10 fnet_count FNET signal
settlement number
of times
1-15 3
11 poff_time PON signal OFF
time
0-15 3
12 mswon_level_judge Sense number of
times until
settlement of
MSW_ON signal
level
2-15 3
1
SIMULATION 66-43
PIC ADJUSTMENT VALUE WRITING.
ENABLE WRITE PIN(for FAX PROGRAM ROM).
SELECT 0-12, AND PRESS START.
0.WRITING for PIC 1.ci_level_judge 2
2.ci_cycle_min 10 3.ci_cycle_max 107 4.ci_range 5
5.ci_count 3 6.ci_detect 8 7.fnet_level_judge 1
8.fnet_range 3 9.fnet_time_out 100 10.fnet_count 3
11.poff_time 3 12.mswon_level_judge 3
Press [CUSTOM SETTINGS] key
or press [START] key.
Select other then 0 , and
press [START] key.
Select 1.
Select 0
and press
[START] key.
SIMULATION 66-43
PIC ADJUSTMENT VALUE WRITING. INPUT VALUE 1-15, AND
PRESS START.
1.ci_level_judge(1-15)
1
SIMULATION 66-43
PIC ADJUSTMENT VALUE WRITING.
ARE YOU SURE ?
1.YES
2.NO
SIMULATION 66-43
PIC ADJUSTMENT VALUE WRITING.
EXECUTING...
SIMULATION 66-43
PIC ADJUSTMENT VALUE WRITING.
OK ( or NG )
2
Press [CUSTOM SETTINGS] key
or select 2.
Press [CUSTOM SETTINGS] key.