Service manual

AR-M351U/M451U, AR-M355U/M455U UNPACKING AND INSTALLATION 6 - 3

3) Remove the cushioning materials from the right and left of the

front side.

4) Remove the locking tape from the right and left sidesof the

tray.

Then, Remove the top of the carton and lower the plastic bag

covering the machine while the machine is still on the carton

base.

5) Remove the packing tape from the paper tray, pull out the

paper tray until it stops and remove it by tilting it upward.

6) One person must lift by the empty front tray pocket with the

right hand and steady the machine with the left hand placed at

the upper left of the machine.

The other person must lift with the right hand by using the lift-

ing recess in the rear of the machine and also steady the

machine with the left hand as shown in the illustration.

Note: The center of gravity of the machine lies in the left side

when viewed from the Back of machine. When lifting the

machine, be careful not to drop it.

4. Remove the locking tape

(AR-M355U/M455U (North America),

AR-M351U/M451U (Europe))

5. Unpacking and installation of the

desk unit

Note: In advance to installation of the machine, the paper feed

option units (AR-D27/AR-D28/AR-MU2) should have been

installed.

A. AR-D28

• Start installation after checking that the DATA and COMMUNI-

CATION indicators on the operation panel are neither lit nor

blinking.

Front side

Rear side

Left adjuster: 1 pc.

Front mounting

plates: 2 pcs.

Rear mounting

plates: 2 pcs.

Screws (M4x6):

4 pcs.

Left paper guides: 2 pcs. Right paper guides: 2 pcs.