Service manual

AR-M351U/M451U, AR-M355U/M455U UNPACKING AND INSTALLATION 6 - 14

14.Adjuster installation and adjustment

1) Insert the left adjuster into the paper feed desk.

2) Turn each adjuster until it is brought into contact with the floor.

∗ Be sure to install the left adjuster in order to prevent falling down

of the machine.

Note: If the adjusters are not lowered to the specified positions,

the lower stage tray cannot be pulled out.

15.Using the transport handle

1) Remove the screw, and remove the handle.

2) Insert the handle into the left rack notch diagonally upward as

shown in the figure.

3) Attach the screw which was removed in procedure 1) to

secure the handle.

4) Lift the rear edge of the handle to engage the head with

the rack.

5) After completion of transport, restore the handle to the original

position.

AR-M351U/

M451U

AR-M351U/

M451U +

AR-NC7

AR-M351U/

M451U +

AR-NC8

Key Sheet

(PRINT display)

❍❍ ✕

Key Sheet

(DOCUMENT

FILING display)

✕✕ ❍

Reference