Service manual

Quick Reference Guide: AR-M355U/M455U

Adjustment and Simulation

Adjustment Checklist

Simulation

Note: For detailed instructions, refer to Section 8

of the AR-M355N/M455N Service Manual.

Entering the Simulation Mode

1. Copy mode key ON → Program key ON → Asterisk (*) key

ON → CLEAR key ON →Asterisk key ON → Ready for

input of a main code of simulation

2. Entering a main code with the 10-key → START key ON

3. Entering a sub-code with the 10-key → START key ON

4. Select an item with the scroll key and the item key.

5. The machine enters the mode corresponding to the

selected item.

a) Press START key or EXECUTE key to start

the simulation operation.

b) To cancel the current simulation mode or to

change the main code or the sub code, press

the user setup key.

*Canceling the simulation mode to return to the

normal mode:

Simulation List

Please refer to the Simulation List (pages 1 through 11) that follows.

6. Press CA key.