User`s guide

Table Of Contents
SPECIAL FUNCTIONS
31
TRANSMITTING A LARGE NUMBER OF PAGES (JOB BUILD)
When you need to scan more pages than can be loaded in the automatic document feeder at once, use this function
to scan the pages in sets. The maximum number of pages that can be loaded in the automatic document feeder is 50.
Example: Scanning 100 8-1/2" x 11" (A4) size pages
1
In scanner mode, touch the [SPECIAL
MODES] key and then touch the key.
If the address book screen
appears, touch the
[CONDITION SETTINGS]
key to display the
condition settings screen
(page 11
).
2
Touch the [JOB BUILD] key.
The [JOB BUILD] key is
highlighted.
To cancel the selection,
touch the key once
again so that it is not
highlighted.
3
Touch the [OK] key.
You will return to the
screen of step 1.
4
Place the original in the automatic
document feeder.
5
Follow steps 4 through 22 of "BASIC
TRANSMISSION METHOD" (pages 12
to
14).
6
Press the [START] key.
The pages are scanned.
When scanning is
finished, the [READ-
END] key appears in the
touch panel.
7
Place the next set of pages in the automatic
document feeder.
8
Press the [START] key. (See step 6.)
9
Repeat steps 7 and 8 until all pages have
been scanned, and then touch the [READ-
END] key.
* Divide the original pages into sets of 50 pages or less, and
scan the sets in order beginning from the set with the first
page (first A then B in the above example).
50 pages 50 pages
Page 1 Page 51
Original
SPECIAL MODES
ADDRESS REVIEW
FILE
ENTRY
QUICK FILE
TTINGS
MEMORY BOX
FAX OW
SE
JOB
BUILD
SPECIAL MODES
SPEAKER
RESEND
OK
POLLING