Setup guide

- 28 -
Macintosh
CONFIGURING THE PRINTER DRIVER
Follow the steps below to configure the machine's printer driver.
MAC OS X v10.2.x
1
Make sure that the machine is powered
on.
2
Select "Applications" from the "Go"
menu.
3
Double-click the "Utilities" folder.
4
Double-click the "Print Center" icon
().
The "Printer List" window appears.
5
Click "Add".
6
Select "AppleTalk" in the menu at the
top of the window.
A list of printers connected to the network
will appear.
7
Click the machine's model name in the
list.
The name of the machine that appears is
the name that was entered in the
AppleTalk settings when the network
settings were configured ("xxxxxx" is a
sequence of characters that varies
depending on your machine).
8
Select "Sharp" in the "Printer Model"
menu.
The PPD file selection window appears.
If this is the first time you are installing
a printer driver on your computer, a
confirmation message will appear.
Click the "Add" button.
Note
If multiple AppleTalk zones are
displayed, select the zone which
includes the printer.
Note