Service manual
AR-NB2N SPECIFICATIONS
1 – 5
(3) Send file (message and filename)
• Information contained in filename
Example: AR-M350_20000620_155114_0057_06a3f3393948.pdf
• Mail subject
Can be freely set.
Default: Scanned image. device name: AR-XXX (MFP product name)
Example: Scanned image. device name: AR-350M
• Mail message
The following messages are added to the image send mail.
Example;
Device name :AR-350M
Model name :AR-350M
Location :D2) Planning dept.
File type :PDF MMR (G4)
Resolution :200 dpi x 200 dpi
(4) Recipient registration
[AR-M160/M205, AR-5220]
• Up to 6 destinations can be registered on the network expansion kit
to which the scan can be sent from the network scanner. Six recipi-
ents can be allocated to the scan buttons on the AR-M160/M205, AR-
5220, AR-168S/168D, AR-M150/M155.
• The mail address registered for each destination can be selected
from the mail address which is searched using LDAP.
• The information for each recipient includes the recipient name, IP
address or mail address, scanning size, format type, and scan
parameter.
[AR-168S/168D, AR-M150/M155]
• Up to 200 destinations can be registered on the network expansion
kit to which the scan can be sent from the network scanner.
• The mail address registered for each destination can be selected
from the mail address which is searched using LDAP.
• The information for each recipient includes the recipient name, IP
address or mail address, scanning size, format type, and scan
parameter.
• Either of LDAP-selected or directly-entered mail address scan setting
is available. If the destination is a mail address entered through the
main system or selected by LDAP, this scan setting is used.
• The destination name is displayed on the LCD.
(5) Scanning size
[AR-M160/M205, AR-5220]
• The scanning size is the size of the document sensed or predeter-
mined by the main unit(copier).
• If there is no information available about the document size from the
main unit(copier), scanning is performed according to the scanning
size predetermined in the destination registration section in advance.
However, a detected or predetermined document size takes prece-
dence over the information predetermined.
[AR-168S/168D, AR-M150/M155]
• Scanning size is the size set up in main unit(Copier).
(Apply to the main scan, a subscan, SPF, and OC)
(6) Scanner limitations
[AR-M160/M205, AR-5220]
• This unit should be connected to the USB port on the dual function
board of the main unit(copier).
[AR-168S/168D, AR-M150/M155]
• The scanning function is allocated to the network expansion kit. The b
Button Manager settings are disabled.
• When the network expansion kit is connected, the scanner function
through TWAIN (pull scan) and push scan which used button man-
ager on pc are not available.
Resolu-
tion
75/100/150/200/
300/400/600
75 Selectable reso-
lutions vary with
different mem-
ory capacities.
B/W
thresh-
old
1-254
(default: 128)
128
Light
source
Red/
Green/
Blue
White/
Red/
Green/
Blue
Green White Light source can
be selected only
when the color
mode is in
"Monochrome".
Void On/Off On When On is
selected, the
edges of images
are cut.
Sender name : Use MFP product name.
Date & Time : Date and time at which file is sent
Session page
counter
: Image send counter
Unique identifier : Automatically created based on the information
of the date and time and image send counter.
Device name: Freely set
Model: MFP product name
Location: Freely set
File type: File type of send image
Resolution: Resolution of send image
Setting
Item Default
Remarks
AR-168S/
168D,
AR-M150/
M155
AR-M160/
M205,
AR-5220
AR-168S/
168D,
AR-M150/
M155
AR-M160/
M205,
AR-5220