Setup guide

23
ENGLISH
USING THE STANDARD WINDOWS
PS PRINTER DRIVER (Windows
98/Me/NT 4.0)
If the PS3 expansion kit is installed on the machine and you wish to use the standard Windows 98/Me/NT
4.0 PS printer driver, follow the steps below to install the PPD driver using the Add Printer Wizard.
1
Insert the "Software CD-ROM" into
your computer's CD-ROM drive.
Insert the "Software CD-ROM" that shows
"Disc 1" on the front of the CD-ROM.
2
Click the [Start] button, select [Settings] and
then click [Printers].
3
Double-click the [Add printer] icon.
The "Add Printer Wizard" will appear.
4
Follow the on-screen instructions.
When you are asked to specify the path of
the PPD file, enter the path as follows.
(Substitute the letter of your CD-ROM
drive for "R" in the following paths.)
* In regions other than the U.S., enter "English"
instead of "EnglishA".
Installing the resident font information (Windows 98/Me)
If you have installed the PPD driver on Windows 98/Me and will be using the resident fonts in the
machine, you must install the resident font information. Follow the procedure below to install the
resident font information.
1
Insert the "Software CD-ROM" into
your computer's CD-ROM drive.
Insert the "Software CD-ROM" that shows
"Disc 1" on the front of the CD-ROM.
2
Double-click [My Computer] ( ) and
then double-click the [CD-ROM] icon
().
3
Double-click the [Drivers] folder, the
[Printer] folder, the [EnglishA] folder (for
regions other than the U.S., double-click the
[English] folder), the [PPD] folder, the
[9XME] folder, and then [PFMSetup.exe].
4
Follow the on-screen instructions.
After the resident font information has
been installed, restart your computer.
• The CD-ROM does not include software for Windows NT 4.0.
Contact your dealer or nearest authorized service representative if you want the software for Windows NT 4.0.
• If you are using Windows 2000/XP/Server 2003, you can install the PPD driver from the installer.
•
Be sure to view the Readme file (Readme.txt) before installing the PPD driver. If you are using Windows
98/Me, the Readme file is in the [EnglishA]* folder of the "Software CD-ROM". If you are using Windows NT
4.0, the Readme file will be in the [EnglishA]* folder inside the folder that contains the extracted files after
you get the software. For the location of the folder, see step 4.
Note
Operating system PPD file path
Windows 98/Me R:\Drivers\Printer
\EnglishA*\PPD\9XME
Windows NT 4.0 (Folder containing
extracted files)
\EnglishA*\PPD\NT40
After installation, see "CONFIGURING
THE PRINTER DRIVER" (page 24) to
configure the printer driver settings.
Note
• Before installing the resident font information, be sure to install the PPD driver.
• In the event that a resident font cannot be selected in a software application, install the resident
font information again.
Note
!!install_arp27_Eng.book 23 ページ ２００７年１月１１日 木曜日 午前９時７分