Setup guide

25
CONFIGURING THE PRINTER DRIVER
ENGLISH
When the PPD driver is installed
1
Click the [start] button and then click
[Printers and Faxes].
In Windows 98/Me/NT 4.0/2000, click the
[Start] button, select [Settings], and then
click [Printers].
2
Click the "SHARP AR-XXXX" printer
driver icon and select [Properties] from
the [File] menu.
3
Configure the printer driver for the
options installed on the machine.
(1) Click the [Device Settings] tab.
In Windows 98/Me, click the [Device
Options] tab.
(2) Configure each item based on the
machine configuration.
The items and the procedures for
configuring the items vary depending on the
operating system version.
(3) Click the [OK] button.
If [Printers and Faxes] does not
appear in the [start] menu in Windows
XP, click the [start] button, click
[Control Panel], click [Printers and
Other Hardware], and then click
[Printers and Faxes].
Note
You can check the options that are
installed and the tray settings by
printing out the "PRINTER SETTINGS
LIST" in the custom settings of the
machine. Follow these steps to print
out the "PRINTER SETTINGS LIST":
Press the [CUSTOM SETTINGS] key,
touch the [LIST PRINT] key, touch the
[PRINTER TEST PAGE] key, and
then touch the [PRINTER SETTINGS
LIST] key.
(1)
(2)
(3)
Note
!!install_arp27_Eng.book 25 ページ ２００７年１月１１日 木曜日 午前９時７分