AR-203E Operation-Manual Online-Manual GB
Table Of Contents
- Contents
- How to Use the Online Manual
- Scan
- Troubleshooting
- Identifying Unit Problems
- Check the Connection between the Unit and Computer
- Check Your Computer
- Faint, Uneven or Smeared Print Output
- Characters or Graphics are not Printed in Correct Position
- Nothing Prints
- Poor Scanning Result
- The Scanned Image is Incorrectly Positioned
- Unable to Scan the Image
- Uninstalling the Software
- Printer Driver Features
- Index
INDEX
CONTENTS
15
3
If you are using Windows XP/Vista, you can use the WIA driver to scan from Sharpdesk, Paint and other WIA-compliant
applications. The procedure for scanning using Paint is explained in the following.
1
Place the original you wish to scan on the
document glass/SPF.
Reference: For information on setting an original for scanning, refer
to "ORIGINAL PLACEMENT" in the Operation Manual.
2
After starting Paint, click the "File" menu and select
"From Scanner or Camera".
The scan screen of the WIA driver will appear.
Note
If you have WIA drivers for other devices installed
in your computer, the "Select Device" screen will
open. Select "SHARP AR-xxxx" and click the
"OK" button.
SHARP AR-xxxx
SHARP
AR-xxxx
Scanning an Image from a WIA-Compliant Application (Windows XP/Vista) (part 1)