Operation Manual, Troubleshooting

General Problems

I DON'T KNOW HOW TO CHANGE THE PAPER SIZE

Check Solution

Set the paper size used in each tray in

the tray settings.

■ The "Tray Settings" key can be found in the home screen.

Tap this key to display the tray settings screen.

Tap the tray whose paper size you want to change, select the paper type, and

then tap the [Size] tab. Select the paper size and tap the [OK] key.

If you loaded a special size of paper in the bypass tray, tap the [Direct Entry] key

after tapping the [Size] tab, enter the paper size manually, and tap the [Execute] key.

THE OUTPUT IS NOTICEABLY CURLED AND UNEVEN

Check Solution

Remove the paper, turn it over, and

reload it. Using a different paper type

may solve the problem.

■ This may improve some states of paper curling.

► Placing the original and adding paper (page 5)

THE IMAGE IS SKEWED ON THE PAPER

Check Solution

Is too much paper loaded into a tray? ■ Reload the paper. Load no more than the maximum number of sheets and do not

exceed the indicator line.

The maximum number of sheets varies depending on the paper type setting.

Are the tray guides adjusted to the

width of the paper?

■ Adjust the tray guides to the paper size so that they are neither too tight nor too

loose for the width of the paper.

Are the original guides adjusted to the

width of the paper?

■ Adjust the original guides to the width of the paper.