Operation Manual, User's Manual
8-64
SETTING MODE►SYSTEM SETTINGS
*1 Paper sizes that can be used with this function are 11" x 17", 8-1/2" x 14", 8-1/2" x 11", A3, B4, and A4. (This
function may not take effect with some print methods.)
*2 Can be selected when 2-Up is selected.
*3 Can be selected when 4-Up/8-Up is selected.
*4 Only effective when printing PDF, JPEG, and TIFF files.
*5 When an inner finisher/finisher/finisher (large stacker)/saddle stitch finisher/saddle stitch finisher (large stacker) is
installed
*6 When a finisher/saddle stitch finisher is installed.
*7 When a punch module is installed.
*8 When a saddle stitch finisher/saddle stitch finisher (large stacker) is installed
*9 When a folding unit is installed.
*10 When a trimming module is installed.
PCL Settings
This is used to set the symbol sets, fonts, and line feed code used in a PCL environment.
Settings
Fold
*8, *9
• Enabled
• Disabled
• Saddle Fold
*8
•Z-Fold
*9
•C-Fold
*9
• Accordion Fold
*9
• Double Fold
*9
• Half Fold
*9
Trimming Width Settings
*10
2.0 to 20.0 mm
Quick File
• (Disabled)
• (Enabled)
Setup Items Settings Setting
PCL Symbol Set Setting Specify the symbol set used for printing. • Select from 35 items.
PCL Font Setting Select a font used for printing.
• Internal Font
• Extended Font
• (List of internal fonts when
extended fonts are not
installed.)
PCL Line Feed Code
This setting is used to select how the printer responds when a line
feed command is received.
• 0.CR=CR; LF=LF; FF=FF
• 1.CR=CR+LF;
LF=LF;FF=FF
• 2.CR=CR; LF=CR+LF;
FF=CR+FF
• 3.CR=CR+LF; LF=CR+LF;
FF=CR+FF
Wide A4
When this is enabled, 80 characters per line are printed on the A4
(8-1/2" x 11") size paper using a 10-pitch font. (When this setting is
disabled, up to 78 characters are printed per line.)
• (Enabled)
• (Disabled)
Setup Items Description