Owner's Manual

147
WHEN THE
GRAPHIC SYMBOLS
FLASH
When an original misfeed occurs in the automatic
document feeder, the CHECK ORIGINAL
symbol flashes and this message appears:
Misfeed in doc. feeder
Press HELP
Remove the misfed original carefully as described
below.
1
5. CHECK ORIGINAL SYMBOL
Removing Procedure
Open the feed-side cover of the original
feed section.
2
Remove the misfed original.
. Be careful not to damage the original.
3
Raise the automatic document feeder and
remove any misfed original.
. If an original is left on the glass, remove it.
Close the feed-side cover.
4
5
Reset any originals not copied under the
originals in the original feed tray and resume
copying.