Service manual

AR-203E/5420/M200/M201 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 3
Power save indicator
SCAN indicator
*3: Using the SCAN key to begin scanning
Note:
• Scanning is not possible during a copy job.
• If the SCAN ( ) key is pressed during a print job, the scan
job will be stored.
• When scanning an original that has been placed in the SPF,
only one original can be placed unless you are using Sharp-
desk.
1) Press the SCAN ( ) key.
The unit enters scan mode.
2) Place the original you wish to scan on the document glass/
SPF.
3) Press the right copy quantity key to display the number of
the application that you wish to use for scanning.
The application numbers are initially as follows.
4) Press the start ( ) key.
Scanning will start and the scanned data will be transferred
to the application.
B. AR-M200/M201
For Europe
For SCA/SCNZ/Asia
On: Indicates the unit is in a power save mode.
Blinking: Indicates that the unit is initializing (when the side
cover is opened and closed or the power turned off
and on).
On: The SCAN ( ) key has been pressed and the unit
is in scanner mode.
Blinking: A scan job is being executed from the computer, or
scan data is stored in the unit’s memory.
Off: The unit is in the copy mode.
Application
number
Application launched
SC2 E-mail (your standard e-mail program in
the Windows OS you are using)
SC3 Fax (if a fax program is installed)
SC4 OCR (if an OCR program is installed)
SC5 Microsoft Word (if installed)
SC6 Filing (if a Filing program is installed)
67 8 1011 12 14 159 16 17
1 12
22
211
13
READY TO COPY.
100% A4 0
Display
18 19
20
21
1234
5
12
67 8 1011 1312 14 159 16
34 5
17
READY TO COPY.
100% A4 0
Display
18 19
20
21