Service manual

AR-203E/5420/M200/M201 FIRMWARE DOWNLOAD PROCEDURES 14 - 7

1) Main unit side: Execute simulation No. 49-01 (Flash ROM pro-

gram write mode).

Check that "d" is displayed (or "DOWNLOAD MODE" is dis-

played for the AR-M200/M201) on the operation panel. (Press

and hold [Clear] key and [ZOOM DOWN] key ( ) (or

[ZOOM]/[COPY RATIO] key for the AR-M200/M201) together,

and turn on the power simultaneously.)

2) Connect the machine and the PC with a USB cable.

3) The following display is shown.

Select [Install from a list or specific location] and press <Next>

button.

4) Select [Include this location in the search;]. If the search loca-

tion is not the folder which includes the maintenance tool

driver (Mainte.inf), select <Browse>. If the search location is

the folder which includes the maintenance tool driver, press

<Next> button to go to procedure 7).

5) Select the folder which includes the maintenance tool driver

(Mainte.inf) and press <OK> button.

(Suppose that the driver is included in

C:\MaintenanceTool\Drivers\2kXp folder.)

6) Check the path to the folder which includes the maintenance

tool driver (Mainte.inf), and press <Next> button.

7) When the following display is shown, press [Continue Anyway]

button.