Service manual

AR-203E/5420/M200/M201 FIRMWARE DOWNLOAD PROCEDURES 14 - 8

8) When the following display is shown, installation is completed.

Press <Finish> button.

With the above procedures, installation (on Windows XP) of the

integration maintenance program is completed.

1) Main unit side: Execute simulation No. 49-01 (Flash ROM pro-

gram write mode).

Check that "d" is displayed (or "DOWNLOAD MODE" is dis-

played for the AR-M200/M201) on the operation panel. (Press

and hold [Clear] key and [ZOOM DOWN] key ( ) (or

[ZOOM]/[COPY RATIO] key for the AR-M200/M201) together,

and turn on the power simultaneously.)

2) Connect the machine and the PC with a USB cable.

3) Check that the Found New Hardware Wizard is displayed, and

press <Next> button.

4) Select [Search for a suitable driver for my device] and press

<Next> button.

5) Select [Specify a location] and press <Next> button.

6) Select [Include this location in the search;]. If the search loca-

tion is not the folder which includes the maintenance tool driver

(Mainte.inf), select <Browse>. If the search location is the

folder which includes the maintenance tool driver, press

<Next> button to go to procedure 9).

7) Specify the folder which includes the maintenance tool driver

(Mainte.inf), and press <Open> button.