Service manual

AR-203E/5420/M200/M201 SIMULATION, TROUBLE CODES 10 - 21
46 15 FAX mode density
adjustment (Super fine)
(Executable only when the
FAX is installed.)
[Function]
When [START] key is pressed, scan is started with the entered exposure adjustment value and
the data of the selected mode on the FAX side is changed to the entered value.
For the density adjustment value table data, refer to simulation 46-13 (FAX mode density
adjustment (Normal text).)
[Operation]
18 Image contrast adjustment
(300dpi)
[Function]
Contrast is set for each mode.
When this simulation is executed, the current se value is displayed in 2 digits (Default: 50).
Change the set value and press [START] key to make a copy under the set value.
When the set value is increased, the contrast becomes higher. When the set value is
decreased, the contrast becomes lower.
In this case, only Exp.3 copy is made. When, however, the setting is made to make higher con-
trast, Exp.1 and Exp.5 copies also become in higher contrast. When made to a lower contrast,
Exp1. and Exp.5 copies become lower contrast, too.
Press [Exposure mode selector] key (or [ ] [ ] key for the AR-M200/M201) to switch the
mode. The set value of the selected mode is displayed on the LCD/display. (Adjustment value: 1
– 99)
* No density display on LCD/display.
[Operation]
The operation is similar to simulation 46-01.
Main
code
Sub
code
Contents Details of function/operation
1) Initial display
("XX" is the corresponding exposure adjust-
ment value of the super fine mode stored on
the FAX side.)
2) Enter a 2-digit value as the exposure
adjustment value with [Numeric] key.
("YY" is the entered exposure adjustment
value.)
3) Scan start (self print)
4) Print start (self print)
After completion of printing, returns to “2)”
display.
ADJUST EXP. S-FINE
XX
ADJUST EXP. S-FINE
YY
ADJUST EXP. S-FINE
SCAN YY
ADJUST EXP. S-FINE
PRINT YY
Mode
Display item
(AR-M200/M201)
LED
(AR-M200/M201)
Display lamp
(AR-203E/5420)
Default
AE mode (300dpi) AE COPY mode lamp AE mode lamp 50
TEXT mode (300dpi) TEXT PRINT mode lamp TEXT mode lamp 50
PHOTO mode PHOTO SCAN mode lamp PHOTO mode lamp 50
TS mode (TEXT)
(300dpi)
TSTXT PRINT mode lamp
SCAN mode lamp
TEXT mode lamp
PHOTO mode lamp
50
TS mode (AE)
(300dpi)
TSAE COPY mode lamp
SCAN mode lamp
AE mode lamp
PHOTO mode lamp
50