AR-M201 Operation-Manual Online-Manual GB
Table Of Contents
- Introduction
- How to Use the Online Manual
- Contents
- Basic Printing
- Opening the Printer Driver From the "Start" Button
- Printer Driver Settings
- Printing Multiple Pages on One Page
- Fitting the Printed Image to the Paper
- Two-sided Printing
- Rotating the Print Image 180 Degrees
- Printing a Watermark
- Outline of the Print Status Window
- Sharing the Printer Using Windows Networking
- Shared Printer Settings
- Client Settings
- Scanning Overview
- Scanning from a TWAIN-Compliant Application
- Scanning from a WIA-Compliant Application (Windows XP/Vista)
- Scanning from the "Scanner and Camera Wizard" (Windows XP)
- Outline of Button Manager
- Button Manager Settings
- Troubleshooting
- If a Notice Page is printed
- Printer Driver Features
- Index
3
SCAN
32
CONTENTS INDEX
Button Manager Settings
(part 2)
4
Set up the "Colour Mode", "Edge" and other
scan settings in the "Scan Setup" area.
The tab names are initially "SC1:" to "SC6:". To assign a name to
a tab, click the "Menu Name" button and enter the desired name.
After entering the name, click the "Apply" button or the
"OK" button in the setting screen. The assigned names will
appear in the machine display when you select a scan
menu at the machine. (Example: SC1:xxxxx)
5
Click the "OK" button.
This completes the settings.
If a character that the machine cannot display is entered
in the "Menu Name", "?" is displayed on the machine.
Note