Operation Manual

Press the THERMO. button to set the de-
sired temperature.
• In the AUTO and DRY
mode, the indicator
bars represent
changes in tempera-
ture.
• In the COOL (and HEAT for AY-X08BE/AY-
X10BE/AY-X13BE) mode, the temperature
can be set within the range of 18 to 32 °C
• In the FAN ONLY mode, the temperature
setting cannot be made.
1
E-8
BASIC OPERATION
2
Press the ON/OFF button to start opera-
tion.
• The red OPERATION lamp ( ) on the unit
will light.
3
4
1
4
5
2
3
(
HEAT
is only for AY-X08BE/AY-X10BE/AY-X13BE)
Press the MODE button to select the op-
eration mode.
AUTO HEAT COOL DRY FAN ONLY
5
2°C higher
1°C higher
1°C lower
2°C lower
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
• In the FAN ONLY mode, the fan speed can-
not be set to AUTO.
To turn off the unit, press the ON/OFF but-
ton again.
• The red OPERATION lamp ( ) on the unit
will turn off.
(The heat mode symbol is
provided only on models AY-
X08BE/AY-X10BE/AY-X13BE)
Press the FAN button to set the desired fan
speed.
AUTO HIGH LOW SOFT
|
|
{
{
+-
MODE
SWING
FAN
AM
DISPLAY
1h
FULL
POWER
SET/C