Split Type Inverter Room Air Conditioner OPERATION MANUAL MODELS AY-X09LCJ AY-X12LCJ AY-X18LCJ AE-X09LCJ AE-X12LCJ AE-X18LCJ Thank you for choosing a SHARP air conditioner. Please read this manual thoroughly before using your air conditioner and keep it for future reference.
and cleaning ing ing Specifications NOTE: The figures in this manual may be different to the actual product. that should be prevented. that Collection of such waste should be separated for special treatment as required by local regulations.
, pl ease ref er the mat ter to a qualified air conditioner contractor. objects Don’t exp ose you rsel f to col d output ai r for prol onged periods as it may aff ect you r physi cal con di tion. To change the airflow direction, adjust the vertical and lateral air flow direction by using the remote control. Don’t expose animals and plants directly to the output air flow as it may have a detrimental effect on them. This air conditioner is designed for normal residential use.
Air conditioners absorb heat in the room and transmits it to the outdoor unit, so that indoor ambient temperatures are decreased. Its cooling capacity will increase or decrease according to outdoor ambient temperature. If the unit is running in COOL mode and in low ambient temperature, frost may be formed on the heat exchanger. When indoor heater exchanger temperature decreases below zero, the indoor unit microcomputer will stop the compressor running to protect the unit.
Na me and function of each part
Note: Be sure that there are no obstructions between receiver and remote control; Don't drop or throw the remote control; Don't spill any liquid on the remote control; Don't leave remote control directly in sunlight or hot environments. Pres s this button to turn Sleep mode on or off. Sleep mode "off" is defau lt when switched on. Sleep functi on is cancelled when unit is switched off. Sleep mode durati on can be adjusted . Sleep mode is not avail able under Fan and Auto modes.
Name and function of wireless remote control Some buttons on this control are not applicable to this unit. Preset temperature is increased by pressing this button. Continuously pressing and holding for 2 seconds changes the temperature rapidly. Preset temperature is decreased by pressing this button. Continuously pressing and holding for 2 seconds changes the temperature rapidly. The temperature adjustment is unavailable under the Auto Mode. Press this button to select or cancel Blow mo de.
Some buttons on this control are not applicable to this unit. Press this button to select Timer On setting. Pressing the + or - button during the first 5 seconds adjusts the time value by one minute each time pressed. Holding the + or - button down for more than 2 seconds changes the time rapidly. While time is blinking, press Timer On button to confirm setting. After setting, repressing the Timer On button cancels the operation. sel ect The functions below are not applicable to this model.
Press On /Off button to start or stop operation. to switch On or Off the display on the main unit. m odels to switch BLOW the fan will con tinu e to bl ow af ter the un it is stop pe d to rem ove BLOW BLOW BLOW the BLOW function is not operated. senses the room temperature automatically to select a suitable running method for room comfort.
To set the guide louvre to a desired position, press Swing Up and Down button continuously for more than 2 seconds and hold until desired position is achieved. Releasing the button now stops the swinging at the desired position. After Swing Up and Down mode is switched on, pressing the button again within 2 seconds circulates between the various settings. If button is pressed more than 2 seconds later, the function is switched off.
on the main unit. Operation will be in Auto Run mode and the temperature setting or fan speed cannot be changed. To operate: Press the AUTO/STOP button and the unit will enter into AUTO RUN mode. The microcomputer will monitor the room temperature to select the (COOL, HEAT, FAN) mode automatically, to obtain the comfortable effect. To turn off: Press the AUTO/STOP button to switch the unit off. To operate: Adjust the code switch to AUTO and the unit will enter into AUTO RUN mode.
Care and Cleaning to prevent at the circuit breaker the risk of electric shock. pour or spray liquids directly onto the indoor or outdoor units for cleaning, to prevent risk of electric shock. Only wipe the Rotate the front panel upwards in the direction of the arrow. While holding both sides of the front panel, remove by pulling forwards. Some minor force may be required. Before cleaning, remove the LCD display (if fitted) from the front panel.
Care and Cleaning Removing Rotate the front panel upwards in the direction of the arrow. Pull the air filter downwards and remove from the unit. water temperature should be and leave to dry naturally in a shady location. Never dry it with a heater or open flame, as fire or deformation may occur. in the di rec tion of the ar rows, then cl os e the front panel. Never operate the unit if the wiring or connections have been damaged. report to a licenced contractor.
The air conditioner is not user serviceable. if attempt to If a bad smell has been accumulated from the environment, clean the air filter. If smells persist, contact your Approved Service Centre to arrange cleaning. fluid gurgling noises. This is not a fault - it is the sound of flowi ng refrigerant.
will Has the circuit breaker device tripped off? Have the wiring or connections been damaged?Please report to an authorised air conditioner contractor. Is the fan other working Check that there is no magnetic or electrical interference near the main unit that may be affecting the operation of the controller. Is the wireless remote control within its operating range, or obstructed? Check the condition of the batteries and replace if necessary. Check if the wireless remote control is damaged.
air flow is stopped fros t can be for med on the outdoor heat exchanger. The unit will automatically defrost and the indoor unit will stop blowing air for 3-12 mins. During defrost operation, water or vapour may be emitted. ,disco nnect from the power supply, and report to an authorised air conditioner contractor in the following situations. St rong odours are emi tted Circuit breaker continuously trips off. Water has dripped into or been splashed onto the unit.
The unit mus t only be installed by authorised air conditioner contractors according to mun icipal or governmen t regulations and in compl iance wi th this man ual. The unit should be installed with a dedicated electrical circuit, and a circuit breaker should be fitted in accordance with regulations. Proper installation position is vital for correct and efficient operation. Avoid the following positions: liquids electro-magnetic Where salt-laden air is a problem (such as close to coastal areas).
A dedicated power supply circuit should be used, in accordance with local electrical safety regulations. The product should be installed by a licenced air conditioning contractor in accordance with AS/NZS3000 and your electrical supplier's rules. A circuit breaker should be installed. WARNING: inadequate or incorrect electrical connections may cause electrocution or fire. . P lease ensure the the unit is reliably earthed. the air conditioner is the earthing wire, and cannot be used for any other purpose.
Gap Gap Gap 180 Gap G ap Gap Height Gap G ap Gap
Installing the indoor unit is at the lef t, the righ t si de sh ou ld be slightly higher to allow drainage. Spirit Level gap gap proper Drainage hoses passing through indoor areas should be wrapped with insulation material. by rotating upwards. Remove the electrical connection cover plate and screw. hole in the provided using Replace .
Installing the indoor unit All interconnecting wiring between indoor and outdoor unit must be performed by a licenced electrical contractor in accordance with AS/NZS3000. the unit to screws adequately to prevent loosening. Ensure the electrical connections are properly earthed to prevent electrical shocks. Ensure all wiring connections are secure and the cover plates are reinstalled properly. Poor installations that allow dust or moisture incursion may cause fire or electrocution.
Installing the Outdoor Unit Remove electrical connection access plate (either right hand side or front) from the outdoor unit. Replace access plate (either right hand side or front) on the outdoor unit. Incorrect unit failure.
Installing the Outdoor Unit soapy gas detection are leaking. Outdoor attach satisfactorily.
satisfactory to the product. product. Are the inlet and outlet air openings blocked? Is the quantity of gas charge sufficient for the length of pipe run? may be insufficient.
Specifications Model AY-X09LCJ；AE-X09LCJ Function COOLING HEATING Rated Voltage 220－240V Frequency(Hz) (High/Standard *) 50HZ Total Capacity (W) (High/Standard *): 3300/2600/ 1188(W) 3800/2850/1109 (W) 11200/9000/4063(Btu/h) 13000/9800/3792(Btu/h) Power Input (W) (High/ Standard*) 1200/600/264 1250/650/230 Rated Input (W) (High/ Standard *) 1200 1250 5.5 6.
AE-X09LCJ Model of Outdoor Unit Compressor SANYO Manufacturer/trademark Compressor Model C-6RZ110H1A Compressor Type Twin rotory L.R.A. (A) 33 Compressor RLA(A) 4.59 Compressor Power Input(W) 800 Overload Protector Int11l-3979 Throttling Method Capillary throttling Starting Method Transducer starting Working Temp Range (℃) -7℃≤T≤43℃ Condenser Aluminum fin-copper tube Pipe Diameter (mm) 9.52 Rows-Fin Gap(mm) 2-1.
Model AY-X12LCJ；AE-X12LCJ Function COOLING HEATING Rated Voltage 220-240V~ Frequency(Hz) (High/Standard *) 50HZ Total Capacity (W) (High/Standard /min*): 4000/3500/ 1233(W) 4100/3850/830 (W) 13600/12000/4200(Btu/h) 14000/13000/2830(Btu/h) Power Input (W) (High/ Standard*) 1400/1000/262 1450/1066/233 Rated Input (W) (High/ Standard *) 1400 1450 6 6.
AE-X12LCJ Model of Outdoor Unit Compressor Manufacturer/trademark Compressor Model C-6RZ110H1A Compressor Type Twin rotory L.R.A. (A) 33 Compressor RLA(A) 4.59 Compressor Power Input(W) 800 Overload Protector Int11l-3979 Throttling Method Capillary throttling Starting Method Transducer starting Working Temp Range (℃) -7℃≤T≤43℃ Condenser Aluminum fin-copper tube Pipe Diameter (mm) 9.52 Rows-Fin Gap(mm) 2-1.
Model AY-X18LCJ；AE-X18LCJ Function COOLING HEATING Rated Voltage 220-240V~ Rated Frequency 50Hz 5650/5300/1610 W 6260/5600W/1217 W 19300/18000/5500 (Btu/h) 21350/19100/4150 (Btu/h) Power Input (W) 2100/1540/ 370 W 2300/1610/ 398 W Rated Input (W) 2450 2650 10.7 11.5 Total Capacity (W/Btu/h) Rated Current (A) 830/670/600 Air Flow Volume (m /h) (H/M/L)** 3 Dehumidifying Volume (l/h) 3.0 EER / C.O.P (W/W) 3.44/3.
AE-X18LCJ Model of Outdoor Unit Compressor Manufacturer/trademark China Resources (Shenyang) Sanyo CO.,LTD Compressor Model C-6RVN93H0N Compressor Type twin rotary compressor L.R.A. (A) 41 Compressor RLA(A) 7 Compressor Power Input(W) 1610 Overload Protector 1NT11L-3979 Throttling Method Capillary Starting Method capacitor Working Temp Range (℃) -7℃≤T≤43℃ Condenser Aluminum fin-copper tube Pipe Diameter (mm) 7 Rows-Fin Gap(mm) 2-1.
:$55$17< $LU &RQGLWLRQHUV 6KDUS &RUSRUDWLRQ RI $XVWUDOLD 3W\ /WG JXDUDQWHHV WKDW VKRXOG D GHIHFW LQ WKLV SURGXFW GXH WR HLWKHU )$8/7< 0$7(5,$/6 RU :25.
SHARP FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.au OR CALL SHARP CUSTOMER CARE 1300 135 022 (LOCAL CALL COST APPLY WITHIN AUSTRALIA) SHARP CORPORATION OF AUSTRALIA PTY LTD SHARP FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.
SHARP CORPORATION OF AUSTRALIA PTY LTD ABN 40 003 039 405 1 Huntingwood Drive HUNTINGWOOD NSW 2148 www.sharp.net.
