User guide

GB-13
ENGLISH
Be sure to stop the operation and turn off
the circuit breaker before performing any
maintenance.
CLEANING THE AIR FILTERS
The lters should be cleaned every two weeks.
1
Turn off the unit.
2
Remove the lters.
1
Lift the open panel.
2
Pull the air lters down to remove them.
3
Take off the air purifying lters
from the air lters.
4
Clean the lters.
Use a vacuum cleaner to remove dust. If
the lters are dirty, wash them with warm
water and a mild detergent. Dry lters in
the shade before reinstalling.
5
Reinstall the air purifying lters.
6
Reinstall the lters and close the
open panel.
MAINTENANCE
MAINTENANCE AFTER AIR CONDI-
TIONER SEASON
1
Operate the unit in the SELF CLEAN
operation to thoroughly dry inside
the unit.
2
Stop the operation and turn off the
circuit breaker.
3
Clean the lters, then reinstall them.
MAINTENANCE BEFORE AIR CON-
DITIONER SEASON
1
Make sure that the air lters are not
dirty.
2
Make sure that nothing obstructs
the air inlet or outlet.
REPLACING THE AIR PURIFYING
FILTER
The lters should be changed every 3 - 6
months
1
Take off the old air purifying lters
from the air lters.
2
Set the new air purifying filters,
under the lter stoppers on the air
lters.
NOTE:
The air purifying lters are not washable for
reuse. The new lters are available at your
nearest dealer.
Disposal of Filters
Please dispose of replaced lters according to
the local disposal laws and regulations.
AIR PURIFYING lter materials
Filter:Polypropylene
Frame:Polyester
1
2
CLEANING THE UNIT AND THE RE-
MOTE CONTROL
Wipe them with a soft cloth.
• Do not directly splash or pour water on them.
It can cause electrical shock or equipment
damage.
Do not use hot water, thinner, abrasive pow-
ders or strong solvents.
Air lter
Air purifying lter
Filter stopper
2
1
AY-XPC18LR_OM_ENG.indd 13AY-XPC18LR_OM_ENG.indd 13 2010-03-18 16:45:482010-03-18 16:45:48