User guide
Table Of Contents
- Introduction
- Connection
- Disc Playback
- Before Starting Playback
- BD/DVD/CD Playback
- Playback Functions
- Fast Forward/Reverse (Search)
- Skipping to the Next or the Start of the Current Chapter (Track)
- Pause/Frame Advance Playback
- Slow Playback
- Repeat Playback of a Title or Chapter (Repeat Playback)
- Partial Repeat Playback (Repeat Playback of a Specified Part)
- Displaying the Audio Information
- Switching Subtitles
- Switching the Angle
- Displaying the Angle Mark
- JPEG File Playback
- Settings During Playback
- Settings
- Appendix
Audio Connections
Connecting to the Digital Audio Terminal or Audio Jacks
You can connect audio equipment or the TV to the DIGITAL AUDIO OUT terminal or 2CH AUDIO output jacks.
See page 44 for information on the output of next generation audio formats.
•
•
This Player
Audio equipment with a digital audio input terminal or audio jacks
17
Connection
STEPS
Be sure to turn off this Player and the equipment before making any connections.
Firmly connect an optical digital cable (commercially available) or AV cable (supplied) to the optical digital audio
terminals or audio jacks (1 and 2, or 3 and 4).
1
2
After connecting
Load a disc and start playback. (Pages 23–28)•
Amplifier
When using OPTICAL output,
5.1 ch Digital Output is available.
7.1 ch Digital Output is not available.
NOTE:
7.1 ch Audio is available via the HDMI
terminal.
•
TV
To 2CH AUDIO
output jacks
To AUDIO
input jacks
(White)
Optical digital cable
(commercially available)
3
(Red)
(White) (Red)
Red
White
RedWhite
4
To OPTICAL output
terminal
1
To OPTICAL
input terminal
2
AV cable (supplied)