Manual

Before Starting Playback
Adjust the volume to 30 before testing the audio level.
(Page 41)
10 Press A/V/4/I_ to select "Test Start", then
press ENTER.
A test tone is outputted from each speaker inthe
followingorder.
L_C_R_RS_LS_SW
To select a speaker to be tested, press A/T/4/I_ to
select the speaker while the test tone is output.
To stop the test tone, select "Test Tone Stop".
When the sound volume level of each speaker is
uneven, adjusting the level separately.
1 1 Press A/V/4/II_ to select the speaker with the
setting you want to adjust, then press ENTER.
o Toselect the speaker outputtingthe test tone, press
ENTER.
12 Press 4/_ to select "Level".
13 Press A/V to adjust the desired level, then
press ENTER.
14 Repeat from steps 11 to 13 for each speaker.
15 Press A/T/4/_ to select "Finish", then press
ENTER.
1(} Press HOME or EXIT to exit.
_- 40