Manual

Video/Picture/Music Playback
6 Press A/Y to select a folder or file.
o When you select a folder, press ENTER to open it,
and then press A/Y to select a file in the folder.
This system can display still images (JPEG files)
recorded on CD-R/RW discs, DVD-R/RW discs and
USB memory devices.
For details on the still images that you can display using
this system, refer to page 10.
Still images are played one by one while during "Slide
show", they are automaticall replaced one after another.
lUNG ¢ ( i
REV FWD
SKIP SKIP
-'8 8
13
Ciiiiiiiiiiiiiiii_CiiiiiiiiiiiiiiiiiiiCiiiiiiiiiiiiiii__
Buttons under the cover
When you insert or remove a USB memory device, be
sure to turn the main power off and make sure that
"Quick Start" is set to "No" (See page 69).
1 Load a disc or insert a USB memory device
containing Still Images (JPEG files).
o It is recommended that the USB memory device be
connected to the USB2 terminal on the front of the
system.
NOTE
o A USB memory device can be used with either the USB1
or USB2 terminal. When two USB memory devices are
connected to both terminals at the same time, in certain
situations the USB1 terminal may give priority to Local
Storage and JPEG files may not be able to be played back
using this terminal.
2 Press BD/AUX repeatedly to select DISC
function.
The same operation can be performed by pressing
SELECTOR repeatedly on the main unit.
3 Press HOME to display the menu screen.
4. Press A./V to select "Picture", then press _ or
ENTER.
5 Press A/Y to select "DVD/CD*" or "USB
Memory Device", then press _ or ENTER.
* Display name varies depending on the type of media
inserted.
_, If only a "DVD/CD" or a USB memory device is
inserted, the "DVD/CD" or "USB Memory Device"
selection screen does not appear. In such cases, after
step 4, proceed to step 6.
_- 52
8
9
Press ENTER to display the selected file.
The selected still image appears on the screen.
[]
Press I1_,_ SKIP/_| or _D,{ SKIP/|D,- to
replace one image with another.
The same operation can be performed by pressing
REV/II_}_ FWD,
, Press o_-_ RETURN if you wish to return to the
selection screen.
To stop the still image display at any time, press
m STOP.
1 To play back Slide Show, in Step 8 of the
"Displaying Still Images (JPEG files)", press
PLAY (Slide Show).
o Thestill imagesinsidethe selectedfolderare played
as a slide show.
2 To pause the playback at any time, press | | PAUSE.
Press _ PLAY to returnto playback of a slideshow.
To stop the playback at any time, press _ STOP.
1 Press D (Yellow) (Slide Show Menu) while the
selection screen is displayed.
Thesetting screenfor "SlideShow Speed"/"Repeat
Mode Setting"appears.
2 Press A/V to select "Slide Show Speed", then
press I_ or ENTER.
Theslide show speed may be selectedfrom "Fast",
"Normal", "Slow1" and "Slow2".
3 Press A/T to select the desired speed, then
press ENTER.
4 Press A/T to select "Repeat Mode Setting",
then press _ or ENTER.
5 Press A/T to select the desired item, then
press ENTER.
,, Thedesired itemmay be selectedfrom "Yes"or "No".
6 Press EXIT to exit.