Manual

SETTINGS
This allows you to perform and/or change the
communication setting. This setting is required to use
BD-LIVE functions, the RSS reader function, Netflix
and software updates that connect to the Internet.
NOTE
o Make sure that the L&N cable is connected to this system.
(See page 32.)
,, For manually performing the setting, the following
information of the connected router or modem is required.
Confirm the information prior to the setting.
- IP address, netmask, gateway, DNS address
o Besides, if specifying a proxy server, the following
information specified from your Intemet service provider is
also required. Confirm the information prior to the setting.
- IP address and port number of the proxy server
o Netflix is not available when a proxy server is used for an
Internet connection. (See pages 53-54.)
iiiiii:ii ilii
Buttons under the cover
1 Press BD/AUX repeatedly to select DISC
function.
Thesame operation can be performed by pressing
SELECTOR repeatedlyon the mainunit.
2 Press HOME to display the menu screen.
3 Press A/T to select "Settings", then press p, or
ENTER.
4 Press A/T to select "Communication Setup",
then press p, or ENTER.
5 Press ENTER, then press A/T to select
"Change", then press ENTER again.
,, For initializing the current setting, select "Initialize",
then press ENTER.
6
8
For setting the IP address, press _1/1_ to select
"Yes" or "No", then press ENTER.
,, If selecting "Yes": The IP address is automatically
obtained.
,, If selecting "No": The IP address, netmask and
gateway are manually entered using the screen for
inputting characters. (See page 73.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
Select "Next", then press ENTER.
,, If selecting "Yes" in the step 6, go to the step 10.
Enter your DNS address.
,, The primary and secondary DNS addresses are
entered using the screen for inputting characters. (See
page 73.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
9 Select "Next", then press ENTER.
1 0 For setting the proxy server, press 4/1_ to
select "Yes" or "No", then press ENTER.
,, If selecting "Yes": The IP address or proxy server
name and port number for the proxy server specified
from your Internet service provider are entered using
the screen for inputting characters. (See page 73.)
,, If selecting "No": Go to the next step.
1 1 Select "Next", then press ENTER.
(Continued on the next page)
(_) - 71