Operation Manual, User's Manual
Table Of Contents
5-15
SCANNER/INTERNET FAX►BEFORE USING THE MACHINE AS A NETWORK SCANNER
ORIGINAL SIZE
TRANSMITTABLE ORIGINAL SIZES
The following original sizes can be transmitted
* A long original can be transmitted.
THE SIZE OF THE ORIGINAL PLACED IN THE
AUTOMATIC DOCUMENT FEEDER
When a standard size original is placed in the automatic document feeder, the original size is automatically detected and
displayed in "Scan Size" on the based screen.
► SCAN SIZE AND SEND SIZE (ENLARGE/REDUCE) (page 5-50)
Standard sizes are sizes that the machine can automatically detect. The standard sizes are set in "Original Size
Detector Setting" in “Settings”.
List of original size detector settings
► Detectable original sizes (page 1-105)
Minimum original size Maximum original size
Using the automatic document feeder
131 mm (height) x 140 mm (width)
(5-1/8" (height) x 5-1/2" (width))
297 mm (height) x 1000 mm* (width)
(11-5/8" (height) x 39-3/8" (width))
Using the document glass -
297 mm (height) x 432 mm* (width)
(11-5/8" (height) x 17" (width))
When the automatic original detection function is operating and the original (of inch or non-standard size) is placed, the
closest standard size may be displayed or the original size may not appear. In this event, manually set the correct original
size.
►
SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE (page 5-51)
► SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES (page 5-52)
To specify the size that the machine can automatically detect:
Select the group of detected original sizes by selecting [System Settings] in “Settings (administrator)” → [Common Settings]
→ [Device Control] → [Condition Settings] → [Original Size Detector Setting].