ECO Declaration

Annex B1 of ECMA-370 6
th
edition Page 4 (6)
Model number *
MX-C607P
Logo
Issue date *
15th, April 2020
Product environmental attributes - Market requirements (continued) Requirement met
Item
Yes
No
n.a.
Material and substance requirements (continued)
P7.21*
Biobased plastic material content is used in the product (See NOTE B7):
If YES; at least one of the two alternatives below shall be answered;
a) Of total plastic parts’ weight > 25 g, the biobased plastic material content (calculated as a percentage of
total plastic by weight) is %.
or
b) The weight of the biobased plastic material is g.
P7.22*
Light sources are free from mercury, i.e. less than 0,1 mg/lamp.
If mercury is used specify: Number of lamps: and maximum mercury content per lamp: mg
P7.23*
If product includes an integral display, the total mercury content in the integrated display: mg
P8
Batteries
P8.1*
Battery chemical composition: LiMnO2
P9
Energy consumption (See NOTE B8)
P9.1
For the product the following power levels or energy consumptions are reported:
Energy mode *
Power level at
100 V AC
Power level at
115 V AC
Power level at
230 V AC
Reference/Standard for energy
modes and test method *
Sleep mode for ENERGY
STAR® Operational Mode
(OM) products
W
W
W
Standby/off mode for
ENERGY STAR Operational
Mode (OM) products
W
W
W
TEC value for ENERGY STAR
TEC products (TEC= Typical
Energy Consumption)
kWh/week
kWh/week
2.8 kWh/week
Energy Star (ver. 2.0)
Highest possible power
consumption
W
W
1210 W
Operating mode
W
W
760 W
Ready mode
W
W
45 W
Energy Saving Mode A
W
W
39 W
Energy Saving Mode B
W
W
1.5 W
Plug-in off mode
W
W
0.2 W
External Power Supply Efficiency Level (International Efficiency Marking Protocol) * :
Print/Scan Speed * : 60 images per minute
Color/Monochrome
Default time to enter energy save mode: 15 minutes
P9.2*
Information about the energy save function is provided with the product.
P10
Emissions (See NOTE B8)
Noise emission Declared according to ISO 9296 (See NOTE B9)
P10.1
Mode
Mode description
Statistical upper limit A-weighted sound power level,
L
WA,c
(B)
Idle
* Idle/Ready
* 3.1
Operation
* Duplex Monochrome Printing
* 7.3
Other mode
Simplex Monochrome Printing
7.1
Measured according to: ISO7779 ECMA-74
Other (only if not covered by ECMA-74 with L
pAm
measurement distance m)
NOTE B6 Applies to a product containing plastic parts whose combined weight exceeds 100 g with the exception of
printed circuit boards, cables, connectors and electronic components and bio-based plastic material.
NOTE B7 The following is to be excluded from the calculation of percentage: printed circuit boards, labels, cables,
connectors and electronic components and postconsumer recycled plastic.
NOTE B8 A Guidance document on Energy efficiency is available;
see http://www.ecma-international.org/publications/standards/Ecma-370.htm
.
The above TEC value meets TEC Requirement of
ENERGY STAR for Imaging Equipment Version 2.0 .