Operation Manual, User's Manual

2-101
COPIER►OTHER FUNCTIONS
INSERTING COVERS IN COPIES (COVERS/INSERTS)
This function inserts a different type of paper into the pages corresponding to the front and back covers of a copy job.
It is helpful when you want to change cover paper to make resources look better.
Configure insertion sheet settings if needed.
Copying on a front cover and inserting together with a back cover
Cover inserting examples
The following shows the copy results when front and back covers are inserted into six 1-sided original pages or three
2-sided original pages in the four copy modes below.
1-sided copying of 1-sided originals
• To insert insertion sheets, see "INSERTING INSERTION SHEETS IN COPIES (COVERS/INSERTS) (page 2-109)".
• For N-Up, the layout is based on the first page and excludes covers.
Setting conditions for each cover
Resulting copies
Front Cover Back Cover
Not copied Not copied
Inserts cover sheets at the beginning and end of copies.
1-sided copy Not copied
Makes a 1-sided copy on the first original page for front cover, and inserts a back
cover at the end of copies.
2-sided copy Not copied
Makes a 2-sided copy on the first and second original pages for front cover, and
inserts a back cover at the end of copies.
5
4
2 3 4 51
3
2
1
Front cover paper Back cover paper Copy
Back Cover
Front Cover
2
1
3
6
4 5
1
2
3
6
4 5
1
2
3
6
4 5