Operation Manual

9
E
Supplied Components
If any components are missing, please contact your dealer.

Liquid Crystal Display Monitor: 1

Power cord

HDMI cable: 1

USB Type C cable (26.2 feet [8 m]): 1

USB Type C extend cable: 1

CD-ROM (Utility Disk): 1

Setup Manual: 1

Touch pen: 1
* The remote control unit is supplied with the PN-ZR02 (optional).
(Remote control sensor box is not used.)
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
About USB Type C extend cable
• ConnecttheUSBTypeCextendcable(supplied)betweentheUSBTypeCcable(supplied)andtheexternaldevice.
When connecting/disconnecting to the external device, plug/unplug the USB Type C extend cable to prevent damage to the
USB Type C cable.
Caution
• TheUSBTypeCcablemayalsoprovidepowertotheconnectedcomputer.
Contact your local electrical contractor before running the supplied cable under carpets, behind walls or over ceiling tiles, as
regulations may vary.
TIPS
• WhentheInformationDisplayDownloaderisinstalled,youcancheckanddownloadthemostrecentversionsofthesoftware
programs.

USB A to B cable (for touch back): 1

Cable clamp: 1

Camera: 1

Knurled screw (M3): 2

USB A to B cable (for camera): 1

S/PDIF cable: 1

3.5 mm mini jack to USB A cable: 1
System Requirements
Hardware Must have a USB 2.0 compliant port.
Operating system
Windows 8.1 (32-bit or 64-bit version), Windows 10 (32-bit or 64-bit version)
(Windows 10 recommended.)
macOS v10.12, v10.13
Google Chrome OS Version 75 or later
The USB port varies depending on the terminal connected to the computer.
USB Type C 1 input terminal USB Type C 1 input terminal
USB Type C 2 input terminal USB Type C 2 input terminal
HDMI input terminal USB Type B input terminal for touch back

IoT sensor hub: 1

Micro USB cable (for IoT sensor hub): 1

Knurled screw (M3): 2

IoT sensor hub screw (M3): 2

IoT sensor hub mounting brackets (L/R):
x1 each