RESU Salesbook

Sect. 2 Disassemble RESU10H (Type-R)
RESU10H pack voltage must remain above > 84V in orde
r to remain in operation or in the field.
1) Carefully remove the top cover by prying the black casing at the rear corners
2) Remove the inside top cover user a 10mm socket or driver.
[torque to 6nm for dis and re-assembly]
1. Before opening the top cover of battery, please make sure to check the following:
- The battery must be disconnected from the inverter.
- Battery circuit breaker(also the AUX power or DS switch ) is in OFF position.
2. Wear Insulation gloves when disassembling the battery.
Warning
• Loosen 6 Hexagonal bolts
• Disassemble the
power cable
plug-in connector)
Do Not Publish
- 32 / 37 -
7. Appendix
7.1 RESU Pack System Checks_RESU10H Type-R (HV)